Get busy this fall with the best air duct cleaning tools and supplies.
-
AGR601 – Residential Button-Lock Rotary Brushing Kit
$617.00Residential Button-Lock Rotary Brushing Kit. The Residential Button-Lock Rotary Brushing Kit provides the brushes you’ll need to tackle just about every job. The kit includes 20′ and 30′ drill driven brushing shafts and 8 brushes. Brushes selection outfits you to clean flex duct, round pipe, rectangular duct, dryer vents and more. This rotary brushing cable and system is designed to be used with a clutch enabled drill.
-
CAS104 – 3/8″ dia. x 50′ Compressed Air Hose.
$78.003/8″ dia. x 50′ Compressed Air Hose. This Goodyear Compressed Air Hose is rated for 300 PSI and comes with standard 1/4″ airline fittings. On the male connector side, this hose has a strain relief to extend the life of the hose at the connection site.
-
CAS119-F – 5′ Flexible Hurricane Rod
$26.005′ Flexible Hurricane Rod. Flexible Hurricane Rods are the ideal tool for compressed air cleaning of duct work in residential & light commercial settings. Use the 5′ Flexible Hurricane Rods to connect extensions to reach down branch duct work up to 30′ in length.
-
CAS119-M – 5′ Medium Hurricane Rod
$26.005′ Medium Hurricane Rod. Flexible Hurricane Rods are the ideal tool for compressed air cleaning of duct work in residential & light commercial settings. Use the 5′ Medium Hurricane Rods to connect extensions to reach down branch duct work up to 30′ in length.
-
CAS119-R – 5′ Rigid Hurricane Rod
$32.005′ Rigid Hurricane Rod. Rigid Hurricane Rods are the ideal tool for compressed air cleaning of duct work in large commercial settings. Use the 5′ Rigid Hurricane Rods to connect extensions to reach down straight duct work in excess of 30′ and well over 100′ in length.
-
CAS135 – Hurricane Forward Whip with Jets.
$31.00Hurricane Forward Whip with Jets. The Hurricane Forward Whip combines the forward force of jets and a 12″ medium pressure whip tentacle. This tools is ideal for aggressive cleaning in round steel ductwork. Whip tentacles can be replaced and cut to custom length. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS136 – Hurricane Reverse Whip with Jets.
$31.00Hurricane Reverse Whip with Jets. The Hurricane Reverse Whip combines the forward force of jets and a 12″ medium pressure whip tentacle. This tools is ideal for aggressive cleaning in round steel ductwork. Whip tentacles can be replaced and cut to custom length. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS137 – Hurricane Single Tentacle Whip
$21.00Hurricane Single Tentacle Whip. The Hurricane Single Whip is the most aggressive whip in the Hurricane System. The Hurricane Single Whip can be ordered in 18″ or 26″ length with high pressure whip material. Use the Hurricane Single Whip to clean rectangular steel duct work, or large diameter round duct work. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS139 – 6 Hole – Hurricane Forward Flow Duct Ball.
$26.006 Hole – Hurricane Forward Flow Duct Ball. The Hurricane Forward Flow Duct Ball provides a gentle cleaning technique can that be used on many types of duct work and in many situations. A Forward Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS140 – Hurricane Reverse Flow Duct Ball.
$26.00Hurricane Reverse Flow Duct Ball. The Hurricane Reverse Flow Duct Ball provides a gentle cleaning technique can that be used on many types of duct work and in many situations. A Reverse Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS141 – Heavy-Duty Hurricane Dryer Vent Line.
$93.00Heavy-Duty Hurricane Dryer Vent Line. The Heavy-Duty Hurricane Dryer Vent Line is a 30′ flexible tubing with a high velocity reverse bullet. The Heavy-Duty Dryer Vent Line requires a Dryer Vent Line Trigger (CAS130) or Hurricane Line (CAS148/CAS149) for operation. The Heavy-Duty Dryer Vent Line propels itself through duct work, breaking clogs and blowing loose material back through the opening. Heavy-Duty Line is designed for extreme heat conditions. Use a Hurricane Trigger Valve (CAS130) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS143 – Hurricane Register Cover Wand Tool.
$24.00Hurricane Register Cover Wand Tool. The Hurricane Register Cover Wand Tool is ideal for reaching through tight spaces to perform compressed air cleaning. Use the Register Cover Wand to reach through painted on floor registers or linear difusers. Use a Hurricane Trigger Valve (CAS130) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS148 – 20′ Hurricane Line.
$103.0020′ Hurricane Line. The Hurricane is the favorite compressed air cleaning system of duct cleaners nation-wide. The Hurricane provides a flexible, one-piece hose, that is lined with steel tape to provide the precise amount of rigidity to push down long runs without trouble.
-
CAS149 – 30′ Hurricane Line.
$120.0030′ Hurricane Line. The Hurricane is the favorite compressed air cleaning system of duct cleaners nation-wide. The Hurricane provides a flexible, one-piece hose, that is lined with steel tape to provide the precise amount of rigidity to push down long runs without trouble.
-
CAS154 – 12 Hole – Hurricane Forward Flow Duct Ball
$31.0012 Hole – Hurricane Forward Flow Duct Ball. The Hurricane Forward Flow Duct Ball provides a gentle cleaning technique can that be used on many types of duct work and in many situations. A Forward Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a 12- hole Hurricane Forward Flow Duct Ball for increase air flow and performace compared to a 6-Hole duct ball. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS155 – 12 Hole – Hurricane Reverse Flow Duct Ball
$31.0012 Hole – Hurricane Reverse Flow Duct Ball. The Hurricane Reverse Flow Duct Ball provides a gentle cleaning technique can that be used on many types of duct work and in many situations. A Reverse Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a 12- hole Hurricane Reverse Flow Duct Ball for increase air flow and performace compared to a 6-Hole duct ball. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS159 – 3/8″ dia. x 100′ Compressed Air Hose.
$119.003/8″ dia. x 125′ Compressed Air Hose. This Goodyear Compressed Air Hose is rated for 300 PSI and comes with standard 1/4″ airline fittings. On the male connector side, this hose has a strain relief to extend the life of the hose at the connection site.
-
CAS170 – Hurricane Triple Whip.
$37.00Hurricane Triple Whip. The Hurricane Triple Whip has three tentacles and can be used for either a ‘PUSH’ or ‘PULL’ cleaning method. The Hurricane Triple Whip has a better coverage rate than a single whip, but less aggressive whipping action. This tool is ideal for cleaning trunk lines or main ducts. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS171 – Hurricane Triple Whip Replacement Tentacles.
$9.00Hurricane Triple Whip Replacement Tentacles. Triple Whip Replacement Tentacles come in a set of three pieces. Tentacles can be replaced into the Hurricane Triple Whip and cut to desired length.
-
CAS174 – Hurricane Spider Whip.
$42.00Hurricane Spider Whip. The Hurricane Spider Whip has eight tentacles and can be used in forward direction. The Hurricane Spider Whip has a better coverage rate than a single or triple whip, but less aggressive whipping action. This tool is ideal for cleaning trunk lines or main ducts. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS174-R – Hurricane Reverse Spider Whip.
$47.00Hurricane Reverse Spider Whip. The Hurricane Reverse Spider Whip has eight tentacles and can be used in reverse direction. The Hurricane Spider Whip has a better coverage rate than a single or triple whip, but less aggressive whipping action. This tool is ideal for cleaning trunk lines or main ducts. It is recommended to use 2-1/2″ hole saw and duct plug for access openings. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS175 – Hurricane Spider Whip Replacement Tentacles.
$16.00Hurricane Spider Whip Replacement Tentacles. Spider Whip Replacement Tentacles come in a set of eight pieces. Tentacles can be replaced into the Hurricane Spider Whip and cut to desired length.
-
CAS178 – Reverse Spinning Duct Ball with 4″ Lead.
$42.00Reverse Spinning Duct Ball with 4″ Lead. The Reverse Spinning Duct Ball with 4″ Lead is a versatile tool for both Air Duct Cleaning and Dryer Vent Cleaning. The Reverse Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Reverse Spinning Duct Ball is compatible with the Hurricane Whip System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS179 – Reverse Spinning Duct Ball with 25′ Lead.
$88.00Reverse Spinning Duct Ball with 25′ Lead. The Reverse Spinning Duct Ball with 25′ Lead is a versatile tool for both Air Duct Cleaning and Dryer Vent Cleaning. The Reverse Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Reverse Spinning Duct Ball is compatible with the Hurricane System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Trigger Valve (CAS130) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS181 – Forward Spinning Duct Ball with 4″ Lead.
$42.00Forward Spinning Duct Ball with 4″ Lead. The Forward Spinning Duct Ball with 4″ Lead is a versatile tool for residential and light commerical Air Duct Cleaning. The Forward Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Forward Spinning Duct Ball is compatible with the Hurricane Whip System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS182 – Hurricane Tool Riser Ball
$26.00Hurricane Tool Riser Ball. Use the Hurricane Tool Riser Ball to make your Hurricane and compressed air duct cleaning tools more effective within the duct. Just by raising the Hurricane compressed air tool over the duct surface, the blast of air or whip tentacle can move more freely and provide a better air scrubbing technique. Standard Hurricane/Rectus plug and coupler attachments. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS300 – Deluxe Hurricane Package
$565.00Deluxe Hurricane Package. The Deluxe Hurricane Package includes the compressed air whips and blow nozzles needed to outfit an Air Duct Cleaner with the tools necessary to tackle most Residential and Light Commercial Air Duct and Dryer Vent Cleaning Jobs. This kit comes complete with two lead lines, 9 compressed air whips/nozzles, high power blow gun, and replacement whip material, Hurricane Riser Ball, and Hurricane Register Wand.
-
CCV002 – Hose Coupling Wrap with Hook & Loop.
$38.00Hose Coupling Wrap with Hook & Loop. The Hose Coupling Wrap with Hook & Loop provides a protective wrap around your vacuum hose connections. Are you looking for extra protection around your hose sleeves, use the the Hose Coupling Wrap with Hook & Loop on vacuum hoses from 6″ – 12″ diameter.
-
DPL001 – 1″ diameter duct plugs.
$85.001″ diameter duct plugs. These hard plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit flush on flat surfaces and are not compatible with round duct work. 500 per package. *** THIS PRODUCT MAY DELIVER AS A SPECIAL ORDER, EXPECT A LEAD TIME OF 5-7 DAYS *** EXPEDITED SHIPPING WILL NOT BE HONORED FOR THIS ITEM.
-
DPL002 – 2-1/2″ diameter duct plugs.
$48.002-1/2″ diameter duct plugs. These soft plastic duct plugs fit inside a 2-1/2″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 16″ or larger. 100 per package.
