-
DVB106 – Wireless SmartPhone Vane Anemometer
$140.00Wireless/Bluetooth SmartPhone Vane Anemometer. Use DVB105 to measure airflow velocity up to 11,000 ft/min. DVB106 features a SmartPhone APP that allows for record keeping, register dimensioning, and automatic CFM conversion. DVB106 shows airflow in FPM, CFM, CMH, MPS. Use DVB106 to also measure Temperature, Humidity and Air Pressure. Send onsite professional reports from your SmartPhone or Device by email. The DVB106 is a perfect low cost solution for measuring airflow velocities for the DEDP Testing protocol and HVAC registers. Download the APP here for ANDROID, and IOS. This device connects to Smart Devices VIA Bluetooth.
-
DPL005 – 1″ diameter duct plugs.
$135.001″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 3,000 per package.
-
ZBG003 – 36″ diameter zone bag.
$133.0036″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
IAQ004 – NADCA Vacuum Test Calibration Meter
$129.00NADCA Vacuum Test Pump Calibration Meter. Use this calibration device before every NADCA Vacuum Test sample is taken. Connect a sampling cassette to the pump tubing, and connect the calibration device to the ‘SAMPLE’ side of the cassette. Adjust the flow control on the pump to the desire flow level. After calibration, connect a clean sampling cassette and proceed with NADCA Vacuum Test.
-
CAS149 – 30′ Hurricane Line.
$120.0030′ Hurricane Line. The Hurricane is the favorite compressed air cleaning system of duct cleaners nation-wide. The Hurricane provides a flexible, one-piece hose, that is lined with steel tape to provide the precise amount of rigidity to push down long runs without trouble.
-
CAS159 – 3/8″ dia. x 100′ Compressed Air Hose.
$119.003/8″ dia. x 125′ Compressed Air Hose. This Goodyear Compressed Air Hose is rated for 300 PSI and comes with standard 1/4″ airline fittings. On the male connector side, this hose has a strain relief to extend the life of the hose at the connection site.
-
ZBG002 – 26″ diameter zone bag.
$103.0026″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
CAS148 – 20′ Hurricane Line.
$103.0020′ Hurricane Line. The Hurricane is the favorite compressed air cleaning system of duct cleaners nation-wide. The Hurricane provides a flexible, one-piece hose, that is lined with steel tape to provide the precise amount of rigidity to push down long runs without trouble.
-
STC012 – 12″ Tapered Starter Collar.
$98.0012″ Tapered Starter Collar. The 12″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 12″ Tapered Starter Collar to steel duct work.
-
GEN007 – Dust Collection Bucket and Clamp
$98.00Dust Bucket and Clamp. The General and Ranger Duct Cleaning Vacuums use this Dust Bucket and Clamp under the filter bag to collect dirt and debris. This heavy duty bucket and clamp allow for easy clean up after duct cleaning jobs. Use a trash liner to collect debris for easy removal. Bucket and Clamp are only sold together.
-
CAS141 – Heavy-Duty Hurricane Dryer Vent Line.
$93.00Heavy-Duty Hurricane Dryer Vent Line. The Heavy-Duty Hurricane Dryer Vent Line is a 30′ flexible tubing with a high velocity reverse bullet. The Heavy-Duty Dryer Vent Line requires a Dryer Vent Line Trigger (CAS130) or Hurricane Line (CAS148/CAS149) for operation. The Heavy-Duty Dryer Vent Line propels itself through duct work, breaking clogs and blowing loose material back through the opening. Heavy-Duty Line is designed for extreme heat conditions. Use a Hurricane Trigger Valve (CAS130) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
ZBG001 – 18″ diameter zone bag.
$88.0018″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
STC010 – 10″ Tapered Starter Collar.
$88.0010″ Tapered Starter Collar. The 10″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 10″ Tapered Starter Collar to steel duct work.
-
CAS179 – Reverse Spinning Duct Ball with 25′ Lead.
$88.00Reverse Spinning Duct Ball with 25′ Lead. The Reverse Spinning Duct Ball with 25′ Lead is a versatile tool for both Air Duct Cleaning and Dryer Vent Cleaning. The Reverse Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Reverse Spinning Duct Ball is compatible with the Hurricane System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Trigger Valve (CAS130) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
DPL001 – 1″ diameter duct plugs.
$85.001″ diameter duct plugs. These hard plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit flush on flat surfaces and are not compatible with round duct work. 500 per package. *** THIS PRODUCT MAY DELIVER AS A SPECIAL ORDER, EXPECT A LEAD TIME OF 5-7 DAYS *** EXPEDITED SHIPPING WILL NOT BE HONORED FOR THIS ITEM.
-
STC008 – 8″ Tapered Starter Collar.
$83.008″ Tapered Starter Collar. The 8″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 8″ Tapered Starter Collar to steel duct work.
-
TAP006 – 24″ Vent / Grill Mask Tape.
$82.00Vent / Grill Mask Tape. 24″ x 200′ with 12″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.
-
FTB020 – Electrak 1 Second Stage Filter
$80.00Electrak 1 Second Stage Filter. The Electrak 1 Second Stage Pocket Filter is designed to catch the finer material that passes through the first stage filter, but is not destined for the HEPA. The Electrak 1 Second Stage Filter is ASHRAE 95% Efficient. Only the finest of particles are filtered by your HEPA pass through the Electrak 1 Second Stage Filter.
-
STC006 – 6″ Tapered Starter Collar.
$78.006″ Tapered Starter Collar. The 6″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 6″ Tapered Starter Collar to steel duct work.
-
PAT006 – 6″ x 6″ Sheet metal duct patch, 100 pack.
$78.006″ x 6″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 100 pieces. Need to order more than one bundle, purchase 500 pieces for discounted prices. Perfect for covering 2″-4″ Hose Connections, Inspection Access, and Compressed Air and Brush Access Points, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (1 PACKAGE). PHONE ORDERS ONLY, 800-728-3828. ***
-
CAS104 – 3/8″ dia. x 50′ Compressed Air Hose.
$78.003/8″ dia. x 50′ Compressed Air Hose. This Goodyear Compressed Air Hose is rated for 300 PSI and comes with standard 1/4″ airline fittings. On the male connector side, this hose has a strain relief to extend the life of the hose at the connection site.
-
PAT010 – 12″ x 12″ Sheet metal duct patch, 25 pack.
$59.2112″ x 12″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 10″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
-
TAP014 – Foil Grip 1404 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Foil-Grip 1404-181-BFX is a UL 181B-FX listed pressures sensitive rolled mastic sealant. The Foil-Grip 1404-181-BFX has superior tack for instant grab strength to galvanized metal, flex duct, PVC coated pipe, and PVC coated ductwork for an immediate airtight bond. The foil facer/butyl adhesive composite provides excellent UV resistance coupled with outstanding water resistance. The easy tear provides a fast installation for airtight seals on above and below grade ductwork applications.
-
ENG142 – 5 Gallon SureCan Gas Can
$55.00ENG142 – 5 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow. By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position! Not only is SureCan easy to use it is the most durable gas can on the market!
-
DSR010 – Decon7 HVAC Disinfectant
$54.00DECON 7 HVAC DISINFECTANT
– 3 PART D7 EVAPORATOR COIL AND HVAC DISINFECTING KIT
– 1 QUART -
PAT008 – 10-1/2″ x 10-1/2″ Sheet metal duct patch, 25 pack.
$53.7510-1/2″ x 10-1/2″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 8″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
-
DSR106 – BBJ FreshDuct Deodorizer Concentrate.
$52.00BBJ FreshDuct Deodorizer Concentrate. FreshDuct contains BBJ EnviroGard™, an encapsulation control agent that controls odors by both encapsulating and breaking down odor molecules, while time releasing a fresh fragrance. BBJ FreshDuct Odor Eliminator leaves the air fresh and clean. Our duct cleaning products are formulated with non-toxic and readily biodegradable ingredients meaning there is no need to evacuate the premises during application. This container can mix up to 5 gallons of RTU deodorizer. Download MSDS
-
TAP012 – Foil-Grip 1402 – Indoor/outdoor rolled mastic sealant – unprinted – 3″ x 100′ roll
$50.00Foil-Grip 1402 is a pressure-sensitive, 40-year cycle, duct joint and general purpose rolled mastic sealant. It provides an instant water-resistant grip to most surfaces including sheet metal, duct board, flex board, PVC-coated duct, and duct wrap vapor barriers. Foil-Grip 1402 is suitable for sub-grade application on PVC-coated duct.
-
DPL002 – 2-1/2″ diameter duct plugs.
$48.002-1/2″ diameter duct plugs. These soft plastic duct plugs fit inside a 2-1/2″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 16″ or larger. 100 per package.
-
PPE025 – Honeywell VAPOR/GAS/P100 Combo-Cartridge
$47.00HONEYWELL NORTH RESPIRATOR FILTER/CARTRIDGE COMBO. THREADS ONTO NORTH HALF/FULL FACE RESPIRATORS. ORGANIC VAPOR / ACID GAS / P100 FILTER.(SOLD AS A 2-PACK)
