-
DSR216 – Hardcast Duct-Seal 321 Indoor/Outdoor Fiber Reinforced Gray. 1 Gallon.
$20.00Hardcast Duct-Seal 321 Indoor/Outdoor Fiber Reinforced Gray. 1 Gallon. Duct-Seal 321 in an all purpose industrial grade duct sealant for all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. It includes UV inhibitors for extended outdoor exposure and built-in fiber reinforcement for added strength. This non-toxic water based product is solvent free and is suitable for residential use. -Duct-Seal 321 is UL 181 B-M Listed -Passes ASTM D-2202, ASTM C-731. USDA, EPA and FDA Approved. LEED compliant SCAQMD Rule 1168. -City of Los Angeles Approval RR #8069
-
PAT006 – 6″ x 6″ Sheet metal duct patch, 100 pack.
$78.006″ x 6″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 100 pieces. Need to order more than one bundle, purchase 500 pieces for discounted prices. Perfect for covering 2″-4″ Hose Connections, Inspection Access, and Compressed Air and Brush Access Points, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (1 PACKAGE). PHONE ORDERS ONLY, 800-728-3828. ***
-
HCT020 – Lenox/Hilmor 12-in-1 Fin Comb
$25.00Lenox/Hilmor 12-in-1 Fin Comb. Professional quality hand tools are a must on the job site. Never clean or maintain a cooling coil without repairing damaged fins. Use the 12-in-1 Fin Comb to straighten bent over fins, restoring coil efficiecy.
-
ZBG003 – 36″ diameter zone bag.
$133.0036″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
STC008 – 8″ Tapered Starter Collar.
$83.008″ Tapered Starter Collar. The 8″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 8″ Tapered Starter Collar to steel duct work.
-
STC006 – 6″ Tapered Starter Collar.
$78.006″ Tapered Starter Collar. The 6″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 6″ Tapered Starter Collar to steel duct work.
-
DSR221 – RE-500 Interior Coating/Insulation Encapsulant – White
$195.00RE-500, now with complete one-coat coverage, is a high-performance, spray-applied insulation encapsulant and coating for use inside HVAC ductwork. RE-500 is formulated with EPA-registered chemicals to resist microbial growth on the surface of the coating. At 13 g/l, this low VOC coating is ideal for critical projects such as hospital and schools. The semi-gloss finish provides a non-stick surface that will inhibit fiberglass degradation and debris accumulation that could lead to mold and mildew growth.
-
ZBG001 – 18″ diameter zone bag.
$88.0018″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
DSR241 – Pan-Grip Burst Bag
$46.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
STC206 – 6″ Floor Vent Hose Adaptor
$181.006″ Floor Vent Hose Adaptor. Use the 6″ Floor Vent Hose Adaptor in unconventional air duct cleaning system hook-ups. Down-Flow furnaces that run duct work through slab are hard to get to, but the 6″ Floor Vent Hose Adaptor solves the problem. 1″ access holes make for easy insertion of cleaning tools.
-
RDC102 – 8″ x 8″ x 10″ Y-Hose Splitter.
$254.008″ x 8″ x 10″ Y-Hose Splitter. Adapt your vacuum hose run from ONE 10″ diameter hose to TWO 8″ diameter hoses. Use with the General or Ranger on small duct cleaning jobs to tackle the supply and return side the HVAC System at the same time. Construction is of #16 Ga. Steel for durability and long lasting use with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hose to hose collars. This fitting connects ONE 10″ diameter hose to TWO 8″ diameter hoses. Other sizes are available on Special Order.
-
HDG010 – 10″ x 25′ Gator Vacuum Hose.
$310.0010″ x 25′ Gator Vacuum Hose. 10″ Gator Vacuum Hose is clear and green with polyolefin and polypropylene construction. 6″ Gator hose has an external all plastic helix and a smooth bore. 10″ Gator Hose is ideal for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning.
-
GEN007 – Dust Collection Bucket and Clamp
$98.00Dust Bucket and Clamp. The General and Ranger Duct Cleaning Vacuums use this Dust Bucket and Clamp under the filter bag to collect dirt and debris. This heavy duty bucket and clamp allow for easy clean up after duct cleaning jobs. Use a trash liner to collect debris for easy removal. Bucket and Clamp are only sold together.
-
PPE011 – DISPOSABLE RESPIRATOR, N95/KN95 or Equivalent, 10-Pack
$39.00PARTICULATE RESPIRATOR, MEETS NIOSH N-95/KN-95 OR EQUIVALENT, 10 Masks / Package
-
IAQ003 – NADCA Vacuum Test Pump
$415.00NADCA Vacuum Test Air Sampling Pump. Rotary Vane Pump capable of 0-30 Liters/Minute (LPM). Operates on 115V. Pump includes flow control valve and tubing.
-
ENG142 – 5 Gallon SureCan Gas Can
$55.00ENG142 – 5 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow.  By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position!  Not only is SureCan easy to use it is the most durable gas can on the market!
-
DSR133 – BBJ MMRii
$14.00BBJ MMR-ii – Quart. MEETS EPA EMERGING PATHOGEN GUIDELINES. Powerful disinfectant and mold remover. MMR-II is a commercial-grade non-porous surface cleaner and broad-spectrum disinfectant combined in one powerful product. Clean and sanitize in one step. Disinfects, and removes unsightly mold streaks on walls, ceilings, diffusers, and other hard surfaces, and kills mold in HVAC systems. MMR-II is an EPA registered commercial cleaner and disinfectant. MMRii is highly effective against a wide variety of pathogenic oranisms, it is ready to use, requires no mixing, and kills 99% of germs.
-
PPE023 – Honeywell P100 Particulate Filter-PINK
$15.00HONEYWELL NORTH P100 PARTICULATE FILTER FOR HALF/FULL FACE MASK. HARDSHELL FILTER THREADS ONTO NORTH HALF/FULL FACE REUSABLE RESPIRATORS.(SOLD AS A 2-PACK)
-
ZBG004 – 48″ diameter zone bag.
$183.0048″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
-
HDV112 – 12″ x 25′ Voluvent Vacuum Hose.
$226.0012″ x 25′ Voluvent Vacuum Hose. 12″ Voluvent Vacuum Hose is polyvinyl chloride construction with a wire helix. The 10″ Voluvent Hose is extremely flexible and collapses laterally under vacuum. 12″ Voluvent Hose is ideal for use in duct cleaning application with electric HEPA vacuums such as the Electrak series. Connect 12″ Voluvent Hose to duct work with a Snap Adaptor or Tapered Starter Collar.
-
DSR010 – Decon7 HVAC Disinfectant
$54.00DECON 7Â HVAC DISINFECTANT
– 3 PART D7 EVAPORATOR COIL AND HVAC DISINFECTING KIT
– 1 QUART -
IAQ004 – NADCA Vacuum Test Calibration Meter
$129.00NADCA Vacuum Test Pump Calibration Meter. Use this calibration device before every NADCA Vacuum Test sample is taken. Connect a sampling cassette to the pump tubing, and connect the calibration device to the ‘SAMPLE’ side of the cassette. Adjust the flow control on the pump to the desire flow level. After calibration, connect a clean sampling cassette and proceed with NADCA Vacuum Test.
-
FOG001 – Ultra-Low Volume Variable Flow Atomizing Fogger.
$375.00Ultra-Low Volume Variable Flow Atomizing Fogger. The BGE Fogger has a 1-Gallon fluid tank to hold any chemical to fog, and a 48″ flexible hose. Fluid nozzle allows operator to control ratio of fluid to air while spraying. Use the FOG001 to spray in duct and HVAC chemicals such as BBJ Maintain C-1, Envirocon, Oxine AD, Micro-Coil Clean, Power-Coil Clean and many others.
-
PPE022 – Honeywell North Full-Face Respirator – Medium/Large
$201.00HONEYWELL NORTH FULL FACE RESPIRATOR – M/L. SCRATCH RESIST 200 DEG POLY-CARB LENS. THREADED FILTER & CARTRIDGE ATTACHMENT. FILTERS/CARTRIDGES SOLD SEPARATE
-
FTH024 – HEPA Filter Cartidge for Electrak Air Duct Vacuum Collector.
$418.00HEPA Filter Cartidge for Electrak Air Duct Vacuum Collector. The replacment HEPA Filter for the Electrak is rated to clean the air to hospital grade (CLASS 100 Air) 99.97% efficient @ 0.3 microns. This filter panel cartridge can be used in either Eletrak 1 or 7 models and any other equipment that specs a 24″ x 24″ x 12″ HEPA Filter rated for 2,000 CFM or less. This filter has one gasketed side and is bidirectional, so it can accept airflow in both directions.
-
DVB106 – Wireless SmartPhone Vane Anemometer
$140.00Wireless/Bluetooth SmartPhone Vane Anemometer. Use DVB105 to measure airflow velocity up to 11,000 ft/min. DVB106 features a SmartPhone APP that allows for record keeping, register dimensioning, and automatic CFM conversion. DVB106 shows airflow in FPM, CFM, CMH, MPS. Use DVB106 to also measure Temperature, Humidity and Air Pressure. Send onsite professional reports from your SmartPhone or Device by email. The DVB106 is a perfect low cost solution for measuring airflow velocities for the DEDP Testing protocol and HVAC registers. Download the APP here for ANDROID, and IOS. This device connects to Smart Devices VIA Bluetooth.
-
TAP012 – Foil-Grip 1402 – Indoor/outdoor rolled mastic sealant – unprinted – 3″ x 100′ roll
$50.00Foil-Grip 1402 is a pressure-sensitive, 40-year cycle, duct joint and general purpose rolled mastic sealant. It provides an instant water-resistant grip to most surfaces including sheet metal, duct board, flex board, PVC-coated duct, and duct wrap vapor barriers. Foil-Grip 1402 is suitable for sub-grade application on PVC-coated duct.
-
INS100 – Video Inspection Push Cable System.
$2,148.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/04/INS100.pdf"] [pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/INS100.pdf"]
Video Inspection Push Cable System. The High Quality Video Inspection Push Cable Inspection System can be deployed on any job-site for inspection up to 100′ into the system. The water-resistant camera head makes this system ideal for dry overhead ductwork, as well as subterranean ducts that may have taken on water or waste. The system records on SD Card for quick and easy transfer of files. The camera head can be corrected by indexing 90 degrees. Variable intensity LED lighting allows the operator to view the camera subject with clarity in all duct work. 7″ HD Color Display allows for still photos and video to be directly recorded onto SD-Card. Display also allows for connetion of external display or remote viewing headset. The system can be operated on battery power or while plugged into standard 110V electrical.
-
HCT019 – Lenox/Hilmor Duct Knife.
$26.00Lenox/Hilmor Duct Knife. Professional quality hand tools are a must on the job site. Never be without a dual sided, specially purposed Duct Knife when the job requires. Make clean cuts through duct insulation or duct board.
