-
FOG011 – Coil-Jet Sprayer (NO WAND)
$759.00Coil-Jet Sprayer with Wand. No more dragging hoses or tearing out coils for cleaning. The CoilJet brings water, power and 100 psi of pressure with it, in a compact and portable design for on-the-go HVAC coil cleaning. Specifically designed for condenser coil cleaning and evaporator coil cleaning, the CoilJet replaces the too powerful pressure washer – and the not powerful enough pump sprayer – to quickly clean coils without damage to sensitive fins – even microchannel coils. The CoilJet holds 3 gallons of water and 1/2 gallon of cleaning solution. An adjustment knob allows the user to mix from straight water to a 4:1 water to solution mixture.
-
CAS119-M – 5′ Medium Hurricane Rod
$26.005′ Medium Hurricane Rod. Flexible Hurricane Rods are the ideal tool for compressed air cleaning of duct work in residential & light commercial settings. Use the 5′ Medium Hurricane Rods to connect extensions to reach down branch duct work up to 30′ in length.
-
IAQ007 – Test Cassette Adaptor
$3.50Adaptor to connect 1/4″ vacuum hose to NADCA Vacuum Test Cassette
-
DSR010 – Decon7 HVAC Disinfectant
$54.00DECON 7Â HVAC DISINFECTANT
– 3 PART D7 EVAPORATOR COIL AND HVAC DISINFECTING KIT
– 1 QUART -
AGR400 – Pneumatic Rotary Brushing Package
$2,065.0024 in nylon brush assembly, 24 in silica carbide brush assembly, 12 in nylon brush assembly, 12 in silica carbide brush assembly, Reversible air motor, Guide system, Multi-positional core assembly, (3) Sets of guide legs (adjust brush height in 1 in increments from 3 in to 11 in), 36 in extension rod with couplers, (4) 60 in extension rod with couplers, On/off control and pressure regulator, Forward air sweep assembly, (1)Â Â Reverse air sweep assembly, (1)Â Â Rugged road case
-
GBD011 – 27 Case Pallet
$2,868.75(PALLET LOAD OF 27 CASES) *** INCLUSIVE OF 15% DISCOUNT *** – Case of 12 Top-Fill Insul-Bag Insulation Containment Bags. The Top-Fill design of the Insul-Bag is unique to Meyer Machine & Equipment, however this bag will fit any insulation vacuum. The Insul-Bag is specially designed to hold more material, rip less, fill better, and cost less than the conventional white insulation bags. Insul-Bag still provides excellent filtration for removal of cellulose, fiberglass, rock-wool, vermiculite and other insulation materials.
-
VAC403 – Max-Vac
$1,095.00WET/DRY HEPA CONTACT VACUUM
– 25′ CRUSH-PROOF HOSE, 35′ CORD, 5-PIECE TOOL KIT
– 425-600 CFM, 110″ H2O LIFT, 1200/2400 WATT
– 20 GALLON TANK W/ 5-YEAR WARRANTY -
VAC402 – Mighty-Vac
$560.00WET/DRY CANNISTER CONTACT VACUUM
– 25′ CRUSH-PROOF HOSE, 35′ CORD, 5-PIECE TOOL KIT
– 250 CFM, 110″ H2O LIFT, 1200 WATT
– 8 GALLON TANK W/ 5-YEAR WARRANTY -
VAC401 – Pac-Vac
$515.00HEPA FILTERED BACK-PACK VACUUM
– 5.5′ CRUSH-PROOF HOSE, 50′ CORD, 5-PIECE TOOL KIT
– 150 CFM, 100″ H2O LIFT
– 7-POINT ADJUSTABLE HARNESS -
SLV003 – 3″ Diameter Hose Sleeve.
$19.003″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 3″ hose.
-
GEL001 – HEPA Filtered Electrak 1 Power Vacuum.
$5,500.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2023/10/Poster_Electrak.pdf"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/06/Electrak_1.pdf"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/IOM_Electrak_1.pdf"]
The NEWLY UPDATED S.M.A.R.T HEPA Filtered Electrak 1 Power Vacuum. The Electrak 1 is how great filtration and portability come together. 2,200 working CFM, 9″ static, Portable Design, and Hospital Grade HEPA Filtration. Are you tired of popping circuit breakers? The Electrak 1 Power Vacuum Collector makes this problem go away. Cruise on AMPERAGE with S.M.A.R.T. (Sensor Managed Air Responsive Technology), and gain control of your filter changes with Filter Minders on every stage of filtration.
If HVAC Air Duct Cleaning is your company’s main discipline or if it’s an ADD-ON Service, The Electrak 1 is the Vacuum/Collector to consider for jobs in Single Family Homes, Condominiums, Apartments, Office Buildings, Clean Rooms, and Hospitals. The Electrak 1 comes standard with the industry’s best filtration, comprised of 3 stages to first remove large debris in the first stage cube filter, remove dirt and dust particles to ASHRAE 95% Efficiency in the second stage filter, and finally Hospital Grade Class 100 Air is expelled from the final stage HEPA filter.
The Electrak 1 cabinets are constructed of ALL ALUMINUM to provide superior strength with minimal weight. The integral hand-truck uses 10″ no-flat wheels to aid in transport over all surfaces including hard floors, carpet, grass & turf, stone/chip parking lots, and when traversing up and down stairways. 5″ pivoting casters allow for easy steering, and the removeable HEPA cabinet has (2) chest handles, and (4) pivoting casters for easy maneuvering.
Airflow with The Electrak 1 is optimized through the combination of all it’s systems: Large Filtration, 12″ Standard Hose Inlet, Variable Frequency Drive. The Variable Frequency Drive, or VFD, allows for the Electrak 1 to have the flexibility to run on any 110-VOLT electrical circuit, and operate on Amperage Loads from 1/2 AMP – 20 AMPS. Additionally, as dirt and debris are removed from the HVAC Air Duct System, the filters become clogged and more efficient. This process naturally reduces the volumetric airflow of the vacuum system, diminishing it’s efficiency. The Electrak’s VFD is able to overcome this natural phenomenon by over-speeding the motor to create higher than normal Static Pressure, and continue moving air through the vacuum/collector. To put things simply, the VFD system on the Electrak allows for the vacuum system to maintain the maximum airflow through the filters taking into account the filter load and amperage available.
When your HVAC Air Duct Cleaning Operation puts you in situations with large/oversize ductwork, or large buildings, use multiple Electrak 1 Vacuum/Collectors to increase volumetric airflow, and tackle small system components quickly.
-
INS301 – GC Botz Duct Inspection Camera Robot
$5,495.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2023/05/IOM_INS301.pdf"] HVAC Duct Inspection is now easier than ever. GC Industrial Inspection Botz brings new technology to the HVAC Cleaning, Ventilation, and Inspection industry. Fly through the duct work, literally, with this DRONE ON WHEELS… or the optional tracks. High Definition video from the front and rear of the bot makes inspection footage easy to make sense of and better for you to sell your cleaning project. Inspection Botz operate over their own secured WIFI Signal, and for extra large jobs small WIFI Extenders can be placed throughout the building to create a WIFI Mesh that keeps you connected at all times. Independently controlled roller wheels give Inspection Botz versatility to turn on a dime, and even drive sideways. The tilting camera head allows the Botz operator to pan left and right, as well as up and down to get a full detail of all in-duct components. Download the GC Inspection Botz app HERE!
-
GBD004 – Case of 10 Heavy-Duty TOUGH Bags.
$130.00Case of 10 Heavy-Duty Tough Disposable Filter Bags. 4′ diameter x 6′ length. Disposable bag is made of throw-away breathable material. Bag volume is 75 cubic feet. Excellent filtration for removal of cellulose, fiberglass, rock-wool, vermiculite and other insulation materials. This product holds up better under TOUGH conditions than standard white insulation bag.
-
CAS119-F – 5′ Flexible Hurricane Rod
$26.005′ Flexible Hurricane Rod. Flexible Hurricane Rods are the ideal tool for compressed air cleaning of duct work in residential & light commercial settings. Use the 5′ Flexible Hurricane Rods to connect extensions to reach down branch duct work up to 30′ in length.
-
HDF425 – DryerFlex 4-Ply Flexible Dryer Vent Transition Hose
$69.004-Ply DryerFlex Flexible Dryer Vent Transition Hose. DryerFlex, a safe and effective airflow-efficient dryer transitin duct, combines the ease of use and flexibility of wire bound foil flex hose with semi-rigid aluminum flex. It simplifies dryer connections and protects against dangerous kinks and bends. Other ducts bend and kink, restricting the airflow and allowing lint to accumulate in the dryer exhaust system to become a fire hazard. With DryerFlex, installations are easier and laundry areas are safer. A UL Listing of UL2158A is required by building code and appliance manufacturers. DryerFlex is UL2158A Listed. Kit includes 2 stainless steel DryerClamps. This product length is 25′.
-
DWV004 – Dryer Wall Vent, Black
$41.95Dryer Wall Vent, Black. The low profile DryerWallVent is a superior, safer choice for venting dryer exhaust to the exterior. The DryerWallVent’s large opening and angled damper provide maximum airflow efficiciency for safe venting of the dryer. Integrated magnets keep the damper closed when the dryer is not in use, keeping pests and elements on the outside. The larger vent opening makes cleaning and maintenance very accessible. Made in the USA from heavy 26 gauge Galvalume Steel.
-
TRAPAK – Air Duct Cleaning Trailer Package
From $4,950.00Duct Cleaning Custom Trailer Packages are available to fit the needs of your company on an individual basis. Design your Trailer Package with The General, The Ranger, The Electrak or any combination of vacuums. Trailer packages can be outfitted with the equipment and tools you need, like an air compressor, vacuum hose, brushes, whips and supplies. In most cases, Air Duct Cleaning Trailer Packages from Meyer Machine & Equipment are ready to roll right onto the job-site. Standard trailers from Meyer Machine & Equipment are white, single axle, 6′ x 12′ with a rear ramp door. Trailers with other options are available for order. Are you starting up a new business or add-on service? Ask about Duct Cleaning Training from Meyer Machine & Equipment. Call for more information on customizing YOUR Air Duct Cleaning Trailer Package.
-
DVB106 – Wireless SmartPhone Vane Anemometer
$140.00Wireless/Bluetooth SmartPhone Vane Anemometer. Use DVB105 to measure airflow velocity up to 11,000 ft/min. DVB106 features a SmartPhone APP that allows for record keeping, register dimensioning, and automatic CFM conversion. DVB106 shows airflow in FPM, CFM, CMH, MPS. Use DVB106 to also measure Temperature, Humidity and Air Pressure. Send onsite professional reports from your SmartPhone or Device by email. The DVB106 is a perfect low cost solution for measuring airflow velocities for the DEDP Testing protocol and HVAC registers. Download the APP here for ANDROID, and IOS. This device connects to Smart Devices VIA Bluetooth.
-
GEN900 – HUM-V 2.0 Assist Drive Kit
$1,750.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/HUM-V-2.0.pdf" title="HUM-V 2.0"]HUM-V 2.0 Assist Drive ADD-ON Package for General, Ranger, or Major. The HUM-V 2.0 Assist Drive provides additional power to help technicians navigate the vacuum over turf or sloped terrain. The HUM-V 2.0 is designed with a 1/2-HP electric motor that is powered by the 12V battery on the vacuum. The HUM-V moves FOWARD & REVERSE at a steady 3 MPH pace, with a 2-wheel transaxle drive. The HUM-V 2.0 is a normally neutral system that allows the vacuum to free wheel without any drive engagement, though the transaxle does apply resistance. New feature on the HUM-V 2.0 includes a 6nM Parking Brake that will hold your vacuum in place at the job site on any slope up to 30-degrees. Available as WEBSITE SALES on NEW Equipment ONLY. Purchasing HUM-V 2.0 requires the addition of a Power Vacuum to your order. HUM-V Vacuum Packages are built to order; please allow extra for delivery. If you would like to Add HUM-V 2.0 as a RETRO-FIT to your existing vacuum, call for details 800-728-3828.
-
PPE007-X – PROCEDURAL EXAM GLOVE, 100 PACK
$19.00SYNTHETIC STRETCH NON-LATEX GLOVES. LATEX-FREE. AMBIDEXTROUS FIT. 100 PCS/BOX. SIZE EXTRA-LARGE
-
PPE007-M – PROCEDURAL EXAM GLOVE, 100 PACK
$19.00SYNTHETIC STRETCH NON-LATEX GLOVES. LATEX-FREE. AMBIDEXTROUS FIT. 100 PCS/BOX. SIZE MEDIUM
-
ENG147 – SureCan Replacement Spout Assembly (2.2 Gal & 5 Gal)
$10.00ENG147 – SureCan Replacement Spout Assembly (2.2 Gal & 5 Gal)
-
ENG146 – SureCan Replacement Thumb Valve (2.2 Gal & 5 Gal)
$10.00ENG146 – SureCan Replacement Thumb Valve (2.2 Gal & 5 Gal)
-
ENG145 – SureCan 2.2 Gallon Replacement Spout & Fill Cap w/Tether
$10.00ENG145 – SureCan 2.2 Gallon Replacement Spout & Fill Cap w/Tether
-
ENG144 – SureCan 5 Gallon Replacement Spout & Fill Cap w/Tether
$10.00ENG144 – SureCan 5 Gallon Replacement Spout & Fill Cap w/Tether
-
ENG143 – 2.2 Gallon SureCan Gas Can
$45.00ENG143 – 2.2 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow.  By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position!  Not only is SureCan easy to use it is the most durable gas can on the market!
-
ENG142 – 5 Gallon SureCan Gas Can
$55.00ENG142 – 5 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow.  By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position!  Not only is SureCan easy to use it is the most durable gas can on the market!
-
DSR133 – BBJ MMRii
$14.00BBJ MMR-ii – Quart. MEETS EPA EMERGING PATHOGEN GUIDELINES. Powerful disinfectant and mold remover. MMR-II is a commercial-grade non-porous surface cleaner and broad-spectrum disinfectant combined in one powerful product. Clean and sanitize in one step. Disinfects, and removes unsightly mold streaks on walls, ceilings, diffusers, and other hard surfaces, and kills mold in HVAC systems. MMR-II is an EPA registered commercial cleaner and disinfectant. MMRii is highly effective against a wide variety of pathogenic oranisms, it is ready to use, requires no mixing, and kills 99% of germs.
-
FOG020 – The Squall
$232.00The Squall Cold Mist Fogger Attachment. The Squall is a remote venturi air/liquid mixing nozzle, specifically designed for use in air ducts and on HVAC equipment. The design allows for a cleaning technician to attach it to standard compressed air duct cleaning extension lines like the Hurricane. Using compressed air its power source, the treatment liquid is drawn through the liquid line to the mixing nozzle where it is then sprayed out in a micro-drop mist. By leveraging the use of existing compressed air extension lines, the Squall cold mist fog can be applied from within the duct, providing consistent product application as the nozzle is retracted back toward the technician. Additionally, The Squall can be used for directed or general broadcast cold mist fog outside of an air duct. Download Fogging Catalog Page.
-
