-
TAP005 – Vent / Grill Mask Tape.
$28.00Vent / Grill Mask Tape. 8″ x 200′ with 4″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.
-
CAS174 – Hurricane Spider Whip.
$42.00Hurricane Spider Whip. The Hurricane Spider Whip has eight tentacles and can be used in forward direction. The Hurricane Spider Whip has a better coverage rate than a single or triple whip, but less aggressive whipping action. This tool is ideal for cleaning trunk lines or main ducts. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS174-R – Hurricane Reverse Spider Whip.
$47.00Hurricane Reverse Spider Whip. The Hurricane Reverse Spider Whip has eight tentacles and can be used in reverse direction. The Hurricane Spider Whip has a better coverage rate than a single or triple whip, but less aggressive whipping action. This tool is ideal for cleaning trunk lines or main ducts. It is recommended to use 2-1/2″ hole saw and duct plug for access openings. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
IAQ001 – NADCA Vacuum Test Cassette. Indiviual Package.
$13.00NADCA Vacuum Test Cassette. 37mm 3-piece air sampling filter cassette preloaded with 0.8 micron MCE filters that are matched in weight to within 50µg. Includes security band. Individual Package. Gravimetric Analytical testing can done at any facility based on using the NIOSH Method 0500 – Total Nuissance Dust. Recommended Vendor: EMSL Analytical, Inc.
-
CLP004 – 2″ – 12″ Adjustable Hose Clamp
$5.002″ – 12″ Adjustable Hose Clamp. Use this 2″ – 12″ Adjustable Hose Clamp to secure vacuum hoses to inlet collars, duct adaptor collars, hose sleeves & reducers, or any other place you hook vacuum hoses up. This quick clamp allows for 5/16″ nut driver or screw driver to tighten, and screw mechanism flips up for quick tighten and release.
-
CAS149 – 30′ Hurricane Line.
$120.0030′ Hurricane Line. The Hurricane is the favorite compressed air cleaning system of duct cleaners nation-wide. The Hurricane provides a flexible, one-piece hose, that is lined with steel tape to provide the precise amount of rigidity to push down long runs without trouble.
-
CAS144 – High Pressure/Flow Replacement Whip Material.
$2.50High Pressure/Flow Replacement Whip Material. The high pressure whip material is ideal for aggressive cleaning applications such as on a Single Tentacle Plain Whip. Material is sold by the foot and can be cut to desired length.
-
PAT008 – 10-1/2″ x 10-1/2″ Sheet metal duct patch, 25 pack.
$53.7510-1/2″ x 10-1/2″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 8″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
-
GBD011 – Case of 10 Top-Fill Insul-Bag Insulation Containment Bags
$125.00Case of 12 Top-Fill Insul-Bag Insulation Containment Bags. The Top-Fill design of the Insul-Bag is unique to Meyer Machine & Equipment, however this bag will fit any insulation vacuum. The Insul-Bag is specially designed to hold more material, rip less, fill better, and cost less than the conventional white insulation bags. Insul-Bag still provides excellent filtration for removal of cellulose, fiberglass, rock-wool, vermiculite and other insulation materials.
-
CAS155 – 12 Hole – Hurricane Reverse Flow Duct Ball
$31.0012 Hole – Hurricane Reverse Flow Duct Ball. The Hurricane Reverse Flow Duct Ball provides a gentle cleaning technique can that be used on many types of duct work and in many situations. A Reverse Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a 12- hole Hurricane Reverse Flow Duct Ball for increase air flow and performace compared to a 6-Hole duct ball. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS175 – Hurricane Spider Whip Replacement Tentacles.
$16.00Hurricane Spider Whip Replacement Tentacles. Spider Whip Replacement Tentacles come in a set of eight pieces. Tentacles can be replaced into the Hurricane Spider Whip and cut to desired length.
-
CAS178 – Reverse Spinning Duct Ball with 4″ Lead.
$42.00Reverse Spinning Duct Ball with 4″ Lead. The Reverse Spinning Duct Ball with 4″ Lead is a versatile tool for both Air Duct Cleaning and Dryer Vent Cleaning. The Reverse Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Reverse Spinning Duct Ball is compatible with the Hurricane Whip System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS170 – Hurricane Triple Whip.
$37.00Hurricane Triple Whip. The Hurricane Triple Whip has three tentacles and can be used for either a ‘PUSH’ or ‘PULL’ cleaning method. The Hurricane Triple Whip has a better coverage rate than a single whip, but less aggressive whipping action. This tool is ideal for cleaning trunk lines or main ducts. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS140 – Hurricane Reverse Flow Duct Ball.
$26.00Hurricane Reverse Flow Duct Ball. The Hurricane Reverse Flow Duct Ball provides a gentle cleaning technique can that be used on many types of duct work and in many situations. A Reverse Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS130 – Hurricane Trigger Valve
$30.00Hurricane Trigger Valve, or Dryer Vent Line Trigger. The Hurricane Trigger Valve is a hand held trigger to operate air-flow through the Hurricane Dryer Vent Line or Rigid Hurricane Extension Rods. Trigger has standard 1/4″ air hose connection, and Rectus quick connect coupler.
-
CAS154 – 12 Hole – Hurricane Forward Flow Duct Ball
$31.0012 Hole – Hurricane Forward Flow Duct Ball. The Hurricane Forward Flow Duct Ball provides a gentle cleaning technique can that be used on many types of duct work and in many situations. A Forward Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a 12- hole Hurricane Forward Flow Duct Ball for increase air flow and performace compared to a 6-Hole duct ball. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS148 – 20′ Hurricane Line.
$103.0020′ Hurricane Line. The Hurricane is the favorite compressed air cleaning system of duct cleaners nation-wide. The Hurricane provides a flexible, one-piece hose, that is lined with steel tape to provide the precise amount of rigidity to push down long runs without trouble.
-
CAS136 – Hurricane Reverse Whip with Jets.
$31.00Hurricane Reverse Whip with Jets. The Hurricane Reverse Whip combines the forward force of jets and a 12″ medium pressure whip tentacle. This tools is ideal for aggressive cleaning in round steel ductwork. Whip tentacles can be replaced and cut to custom length. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS145 – Medium Pressure/Flow Replacement Whip Material.
$2.50Medium Pressure/Flow Replacement Whip Material. The medium pressure whip material is ideal for semi-aggressive cleaning applications such as on a Forward or Reverse Whip with Jets. Material is sold by the foot and can be cut to desired length.
-
DPL003 – 1″ diameter duct plugs.
$32.001″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 500 per package.
-
CAS179 – Reverse Spinning Duct Ball with 25′ Lead.
$88.00Reverse Spinning Duct Ball with 25′ Lead. The Reverse Spinning Duct Ball with 25′ Lead is a versatile tool for both Air Duct Cleaning and Dryer Vent Cleaning. The Reverse Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Reverse Spinning Duct Ball is compatible with the Hurricane System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Trigger Valve (CAS130) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS137 – Hurricane Single Tentacle Whip
$21.00Hurricane Single Tentacle Whip. The Hurricane Single Whip is the most aggressive whip in the Hurricane System. The Hurricane Single Whip can be ordered in 18″ or 26″ length with high pressure whip material. Use the Hurricane Single Whip to clean rectangular steel duct work, or large diameter round duct work. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS119-R – 5′ Rigid Hurricane Rod
$32.005′ Rigid Hurricane Rod. Rigid Hurricane Rods are the ideal tool for compressed air cleaning of duct work in large commercial settings. Use the 5′ Rigid Hurricane Rods to connect extensions to reach down straight duct work in excess of 30′ and well over 100′ in length.
-
CAS135 – Hurricane Forward Whip with Jets.
$31.00Hurricane Forward Whip with Jets. The Hurricane Forward Whip combines the forward force of jets and a 12″ medium pressure whip tentacle. This tools is ideal for aggressive cleaning in round steel ductwork. Whip tentacles can be replaced and cut to custom length. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS182 – Hurricane Tool Riser Ball
$26.00Hurricane Tool Riser Ball. Use the Hurricane Tool Riser Ball to make your Hurricane and compressed air duct cleaning tools more effective within the duct. Just by raising the Hurricane compressed air tool over the duct surface, the blast of air or whip tentacle can move more freely and provide a better air scrubbing technique. Standard Hurricane/Rectus plug and coupler attachments. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS181 – Forward Spinning Duct Ball with 4″ Lead.
$42.00Forward Spinning Duct Ball with 4″ Lead. The Forward Spinning Duct Ball with 4″ Lead is a versatile tool for residential and light commerical Air Duct Cleaning. The Forward Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Forward Spinning Duct Ball is compatible with the Hurricane Whip System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS139 – 6 Hole – Hurricane Forward Flow Duct Ball.
$26.006 Hole – Hurricane Forward Flow Duct Ball. The Hurricane Forward Flow Duct Ball provides a gentle cleaning technique can that be used on many types of duct work and in many situations. A Forward Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
HCT002 – Replacement cutting bit for Adjustable Hole Cutter.
$15.00Replacement cutting bit for Adjustable Hole Cutter. Use this Bit to make the perfect cut.
-
SCR850 – Sheet Metal Zip Screws.
$10.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 500 per package.
-
PAT007 – 8″ x 8″ Sheet metal duct patch, 25 pack.
$41.588″ x 8″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 6″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
