-
CMP002 – 8.5 HP Honda Powered Portable Air Compressor
8.5 HP Honda Powered Portable Air Compressor. This air compressor produces 16 CFM @ 175 PSI. The 10 gallon tank provides air storage suitable for a single technician and Hurricane tools. This portable air compressor features a wheel barrow setup with a large no-flat wheel, and a 4-point landing pad that removes the load from the wheel when at rest. Air manifold features (2) 1/4″ quick connect couplers and a pressure regulator that can be adjusted from 0 PSI to full tank pressure. This compressor will load and unload at 145-175 PSI and is most suitable for dryer vent cleaning and light duty HVAC air duct cleaning operations. This engine is equipped with an electric start package, however a 12-volt battery is not supplied to power the starter motor. All piston compressors are rated for 50% duty-cycle. This air compressor is Proudly Manufactured in the USA.
-
DSR131 – BBJ Mold Control Aerosol
BBJ Mold Control for HVAC Systems and Air Ducts, control and inhibit the growth of microorganisms – such as gram positive and gram negative bacteria, algae, and mold – in HVAC Systems and Air Ducts. This product is RTU (Ready-To-Use) in a 14 fl. oz. aerosol can; use this product in lieu of BBJ Maintain C-1 Concentrate. Download MSDS
-
CLP010 – 3/8″ Pinch Clamp
$2.003/8″ Pinch Clamp. Use the 3/8″ Pinch Clamp for reconnection of 3/8″ O.D. tubing or hose on 1/4″ hose barb. Crimping tool is necessary to create proper closure of clamp.
-
CLP011 – 9/16″ Pinch Clamp
$2.009/16″ Pinch Clamp. Use the 9/16″ Pinch Clamp for reconnection of 1/2″-9/16″ O.D. tubing on hose barb. Crimping tool is necessary to create proper closure of clamp.
-
CLP019 – 5/8″ Pinch Clamp
$2.005/8″ Pinch Clamp. Use the 5/8″ Pinch Clamp for reconnection of 5/8″ O.D. tubing on 3/8″ hose barb. Crimping tool is necessary to create proper closure of clamp.
-
CAS144 – High Pressure/Flow Replacement Whip Material.
$2.50High Pressure/Flow Replacement Whip Material. The high pressure whip material is ideal for aggressive cleaning applications such as on a Single Tentacle Plain Whip. Material is sold by the foot and can be cut to desired length.
-
CAS145 – Medium Pressure/Flow Replacement Whip Material.
$2.50Medium Pressure/Flow Replacement Whip Material. The medium pressure whip material is ideal for semi-aggressive cleaning applications such as on a Forward or Reverse Whip with Jets. Material is sold by the foot and can be cut to desired length.
-
CAS146 – Low Pressure/Flow Replacement Whip Material.
$2.50Low Pressure/Flow Replacement Whip Material. The low pressure whip material is ideal for finesse cleaning applications such as on a compressed air whip. Material is sold by the foot and can be cut to desired length.
-
PPE015 – The Hoodie.
$3.00The Hoodie. The Hoodie is the only disposable head protection garment available. The Hoodie is ideal for use while performing dirty jobs like duct cleaning, insulation removal, mold remediation and many more. The Hoodie is form fitting and fits loose over the nose and mouth for extreme comfort.
-
IAQ007 – Test Cassette Adaptor
$3.50Adaptor to connect 1/4″ vacuum hose to NADCA Vacuum Test Cassette
-
FIT003 – Male Air Couple Plug, 1/4″ MNPT.
$4.00Male Air Coupler Plug, 1/4″ MNPT. Uses standard 1/4″ interchange.
-
FIT011 – Male Air Coupler Plug, 1/4″ FNPT
$4.00Male Air Coupler Plug, 1/4″ FNPT. Uses standard 1/4″ interchange.
-
-
-
CLP004 – 2″ – 12″ Adjustable Hose Clamp
$5.002″ – 12″ Adjustable Hose Clamp. Use this 2″ – 12″ Adjustable Hose Clamp to secure vacuum hoses to inlet collars, duct adaptor collars, hose sleeves & reducers, or any other place you hook vacuum hoses up. This quick clamp allows for 5/16″ nut driver or screw driver to tighten, and screw mechanism flips up for quick tighten and release.
-
PPE031 – Lock-Out Tag-Out Personal Tag.
$5.00Lock-Out Tag-Out Personal Tag. Lock-Out Tag-Out Personal Tags are the First Step in Commercial Job-Site Safety. Keep track of who is in the work area with NAME, DEPT, and EXPECTED COMPLETION notes.
-
PPE008 – LATEX DIPPED WORK GLOVE – M
$6.00PALM & FINGER LATEX DIPPED WORK GLOVE. NYLON/POLYESTER WOVEN GLOVE. SIZE MEDIUM
-
PPE009 – LATEX DIPPED WORK GLOVE – L
$6.00PALM & FINGER LATEX DIPPED WORK GLOVE. NYLON/POLYESTER WOVEN GLOVE. SIZE LARGE
-
-
ENG044 – Kohler Fuel Filter for CH11 – CH15.
$8.00Kohler Fuel Filter for CH11 – CH15. Use this Genuine Kohler Fuel Filter for replacement parts on your Colonel or Air Compressor. Kohler Genuine Fuel Filters should be changed every 200 Hours.
-
VAC304 – 5-Gallon Bucket Lid with Pour Spout
$8.005-Gallon Bucket Lid with Pour Spout. Use this lid with MME Bucket, VAC302, to seal contamination in bucket after using the bucket vac, or for mixing down chemical concentrates to 5-Gallon quantities.
-
CAS171 – Hurricane Triple Whip Replacement Tentacles.
$9.00Hurricane Triple Whip Replacement Tentacles. Triple Whip Replacement Tentacles come in a set of three pieces. Tentacles can be replaced into the Hurricane Triple Whip and cut to desired length.
-
FIT002 – Air Quick Coupler, 1/4″ FNPT
$9.00Air Quick Coupler, 1/4″ FNPT. Uses standard 1/4″ interchange.
-
FIT002M – Air Quick Coupler, 1/4″ MNPT
$9.00Air Quick Coupler, 1/4″ MNPT. Uses standard 1/4″ interchange.
-
GBD005 – Electrak 7 First Stage Filter
$9.00Electrak 7 First Stage Filter. The Electrak 7 First Stage Filter is a disposable fabric sack that catches the large debris in the air stream that will flow through your Electrak 7 HEPA Vacuum. The large debris can be removed from the sack, and the filter media should be changed on every job.
-
IAQ002 – NADCA Vacuum Test Template
$9.00NADCA Vacuum Test Template. Per the ACR-2013 NADCA Standard 5.4.1, this template is .015″ in thickness and contains 2 sample areas 2 cm x 25 cm in parallel sepated by 2.5 cm.
-
BRE045 – 3/8″ Fiberglass Extension Brush Rod.
$10.003/8″ Fiberglass Extension Brush Rod. This is 48″ long and provides a rigid extension for duct brushes. Brush rod uses 1/4″ NPT connection. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
SCR850 – Sheet Metal Zip Screws.
$10.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 500 per package.
-
ENG144 – SureCan 5 Gallon Replacement Spout & Fill Cap w/Tether
$10.00ENG144 – SureCan 5 Gallon Replacement Spout & Fill Cap w/Tether
-
ENG145 – SureCan 2.2 Gallon Replacement Spout & Fill Cap w/Tether
$10.00ENG145 – SureCan 2.2 Gallon Replacement Spout & Fill Cap w/Tether
