-
CAS119-R – 5′ Rigid Hurricane Rod
$32.005′ Rigid Hurricane Rod. Rigid Hurricane Rods are the ideal tool for compressed air cleaning of duct work in large commercial settings. Use the 5′ Rigid Hurricane Rods to connect extensions to reach down straight duct work in excess of 30′ and well over 100′ in length.
-
CAS104 – 3/8″ dia. x 50′ Compressed Air Hose.
$78.003/8″ dia. x 50′ Compressed Air Hose. This Goodyear Compressed Air Hose is rated for 300 PSI and comes with standard 1/4″ airline fittings. On the male connector side, this hose has a strain relief to extend the life of the hose at the connection site.
-
BRE072 – 3/8″ Fiberglass Extension Brush Rod.
$13.003/8″ Fiberglass Extension Brush Rod. This is 72″ long and provides a rigid extension for duct brushes. Brush rod uses 1/4″ NPT connection. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
BRE050 – 5/16″ Nylon Extension Brush Rod.
$26.005/16″ Nylon Extension Brush Rod. This is 48″ long and provides a very flexible extension for duct brushes. Brush rod uses a 5/16″-18 threaded connection. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
BRE049 – 3/8″ Nylon Extension Brush Rod.
$22.753/8″ Nylon Extension Brush Rod. This is 48″ long and provides a flexible extension for duct brushes. Brush rod uses 1/4″ NPT connection. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR695 – AGR6XX Series Extension Rod (BREXXX) Retro-Connector
$18.00AGR6XX Series Extension Rod (BREXXX) Retro-Connector. Use this adaptor to allow the use of AGR600 series brushes with your existing (BREXXX) extension rods, with 1/4″NPT and 5/16″-18 threads
-
AGR661-06 – 6″ Abrasive Button-Lock Brush
$30.006″ Abrasive Button-Lock Brush. Use this agressive and abrasive fibered brush with the AGR6XX series brush system to clean round steel, and other rigid types of duct work. The bristles used in this brush out perform flexible steel bristles, and provide an abrasive grit that is embedded in the fiber to scrub into the duct surface. The agressive bristles in this brush are ideal for chewing up hard dryer lint and other duct debris. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR661-04 – 4″ Abrasive Button-Lock Brush
$29.004″ Abrasive Button-Lock Brush. Use this agressive and abrasive fibered brush with the AGR6XX series brush system to clean round steel, and other rigid types of duct work. The bristles used in this brush out perform flexible steel bristles, and provide an abrasive grit that is embedded in the fiber to scrub into the duct surface. The agressive bristles in this brush are ideal for chewing up hard dryer lint and other duct debris. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR653-30 – 30″ Corner Button-Lock Brush
$93.0030″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods. This brush should be used with a Heavy-Duty Cable ONLY, AGR613-AGR615.
-
AGR653-24 – 24″ Corner Button-Lock Brush
$78.0024″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods. This brush should be used with a Heavy-Duty Cable ONLY, AGR613-AGR615.
-
AGR652-12 – 12″ Corner Button-Lock Brush
$41.0012″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR652-08 – 8″ Corner Button-Lock Brush
$39.008″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR642-16 – 16″ Stiff Button-Lock Brush
$41.0016″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR642-12 – 12″ Stiff Button-Lock Brush
$36.0012″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR641-08 – 8″ Stiff Button-Lock Brush
$29.008″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR632-12 – 12″ Soft Button-Lock Brush
$36.0012″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR631-08 – 8″ Soft Button-Lock Brush
$29.008″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR631-04 – 4″ Soft Button-Lock Brush
$28.004″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR612 – 30′ Standard-Duty Residential Button-Lock Rotary Brushing Cable
$222.0030′ Standard-Duty Residential Button-Lock Rotary Brushing Cable. The AGR612 is part of the AGR6XX series brush system and works with all AGR6XX series button-lock brushes. The Standard-Duty cable is designed for use with brushes 16″ in diameter and smaller. The rotating inner core (AGR692) is field replaceable, to allow for minimal down-time in the case of an over-torque breakage. This rotary brushing cable and system is designed to be used with a clutch enabled drill. An optional adaptor (AGR689) can be used to connect AGR5XX series twisted wire core brushes.
-
AGR611 – 20′ Standard-Duty Residential Button-Lock Rotary Brushing Cable
$181.0020′ Standard-Duty Residential Button-Lock Rotary Brushing Cable. The AGR611 is part of the AGR6XX series brush system and works with all AGR6XX series button-lock brushes. The Standard-Duty cable is designed for use with brushes 16″ in diameter and smaller. The rotating inner core (AGR692) is field replaceable, to allow for minimal down-time in the case of an over-torque breakage. This rotary brushing cable and system is designed to be used with a clutch enabled drill. An optional adaptor (AGR689) can be used to connect AGR5XX series twisted wire core brushes.
-
AGR603 – Button-Lock Dryer Vent Rotary Brushing Kit
$279.00Button-Lock Dryer Vent Rotary Brushing Kit. This kit contains a 30′ brushing shaft, and a 4″ & 6″ abrasive brush. Use this brush kit to chew through the toughest lint clogs and pull them back for containment.
-
AGR601 – Residential Button-Lock Rotary Brushing Kit
$617.00Residential Button-Lock Rotary Brushing Kit. The Residential Button-Lock Rotary Brushing Kit provides the brushes you’ll need to tackle just about every job. The kit includes 20′ and 30′ drill driven brushing shafts and 8 brushes. Brushes selection outfits you to clean flex duct, round pipe, rectangular duct, dryer vents and more. This rotary brushing cable and system is designed to be used with a clutch enabled drill.
