-
DSR124 – Coil-Shot Tablets
$38.00The revolutionary CoilShot cleaning system is designed to offer fast and easy cleaning of residential and light commercial single-pass HVAC coils without the strain and bulkiness of using liquid coil cleaners.
-
DSR001 – Oxine AD -12 Pack
$250.00Oxine AD for use in HVAC Air Ducts. Use Oxine AD to act as a static agent in HVAC Air Ducts. Static agents are those that prevent microorganisms from replicating and are the best alternative to a sanitizer. 12 vials to a case, each vial mixes into 1 Gallon of usable solution.Download MSDS
-
BRE049 – 3/8″ Nylon Extension Brush Rod.
$22.753/8″ Nylon Extension Brush Rod. This is 48″ long and provides a flexible extension for duct brushes. Brush rod uses 1/4″ NPT connection. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
ZBG003 – 36″ diameter zone bag.
$133.0036″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
STC008 – 8″ Tapered Starter Collar.
$83.008″ Tapered Starter Collar. The 8″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 8″ Tapered Starter Collar to steel duct work.
-
STC006 – 6″ Tapered Starter Collar.
$78.006″ Tapered Starter Collar. The 6″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 6″ Tapered Starter Collar to steel duct work.
-
RDC108 – 10″ x 8″ Steel Hose Reducer.
$97.0010″ x 8″ Steel Hose Reducer. Steel Hose Reducers make connecting your hose runs fast and easy. Hose reducers are constructed of rolled steel. The construction makes for a long lasting product with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hoses to reducer. This reducer connects ONE 10″ diameter hose to ONE 8″ diameter hose.
-
HSW003 – 2-1/2″ Lenox Bi-Metal Hole Saw.
$25.002-1/2″ Lenox Bi-Metal Hole Saw. This tough hole saw is great for making 2-1/2″ holes in sheet metal, wood, or other fibrous materials. This hole saw comes complete with pilot bit and fits in any drill with a 3/8″ or larger chuck.
-
GEN007 – Dust Collection Bucket and Clamp
$98.00Dust Bucket and Clamp. The General and Ranger Duct Cleaning Vacuums use this Dust Bucket and Clamp under the filter bag to collect dirt and debris. This heavy duty bucket and clamp allow for easy clean up after duct cleaning jobs. Use a trash liner to collect debris for easy removal. Bucket and Clamp are only sold together.
-
GBD002 – Disposable Insulation Containment Bag.
$15.00Disposable Insulation Containment Bag. 4′ diameter x 6′ length. Disposable bag is made of throw-away breathable material. Bag volume is 75 cubic feet. Excellent filtration for removal of cellulose, fiberglass, rock-wool, vermiculite and other insulation materials.
-
ENG006 – Kohler Air Filter for CH20 / CH640.
$24.00Kohler Air Filter for CH20 / CH640. Use this Genuine Kohler Air Filter for replacement parts on your General. Kohler Genuine Air Filters should be changed every 100 Hours.
-
DSR221 – RE-500 Interior Coating/Insulation Encapsulant – White
$195.00RE-500, now with complete one-coat coverage, is a high-performance, spray-applied insulation encapsulant and coating for use inside HVAC ductwork. RE-500 is formulated with EPA-registered chemicals to resist microbial growth on the surface of the coating. At 13 g/l, this low VOC coating is ideal for critical projects such as hospital and schools. The semi-gloss finish provides a non-stick surface that will inhibit fiberglass degradation and debris accumulation that could lead to mold and mildew growth.
-
CLP011 – 9/16″ Pinch Clamp
$2.009/16″ Pinch Clamp. Use the 9/16″ Pinch Clamp for reconnection of 1/2″-9/16″ O.D. tubing on hose barb. Crimping tool is necessary to create proper closure of clamp.
-
CAS201 – Residential Hurricane Package.
$335.00Residential Hurricane Package. The Residential Hurricane Package includes the compressed air whips and blow nozzles needed to get started cleaning Air Ducts. This kit comes complete with two lead lines and 6 compressed air whips/nozzles.
-
AGR652-12 – 12″ Corner Button-Lock Brush
$41.0012″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
DSR010 – Decon7 HVAC Disinfectant
$54.00DECON 7Â HVAC DISINFECTANT
– 3 PART D7 EVAPORATOR COIL AND HVAC DISINFECTING KIT
– 1 QUART -
PPE006 – MICROPOUROUS COVERALL – X-LARGE
$54.00MICROPOUROUS COVERALL – EXTRA-LARGE
– BARRIER AGAINST DRY AND LIQUID CHEMICAL SPLASH
– HOOD, ELASTIC WRIST, ZIPPER CLOSURE ON FRONT
– FITS A PERSON UP TO 6-FOOT TALL
– 25 pcs. / BOX -
RDC102 – 8″ x 8″ x 10″ Y-Hose Splitter.
$254.008″ x 8″ x 10″ Y-Hose Splitter. Adapt your vacuum hose run from ONE 10″ diameter hose to TWO 8″ diameter hoses. Use with the General or Ranger on small duct cleaning jobs to tackle the supply and return side the HVAC System at the same time. Construction is of #16 Ga. Steel for durability and long lasting use with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hose to hose collars. This fitting connects ONE 10″ diameter hose to TWO 8″ diameter hoses. Other sizes are available on Special Order.
-
FIT002M – Air Quick Coupler, 1/4″ MNPT
$9.00Air Quick Coupler, 1/4″ MNPT. Uses standard 1/4″ interchange.
-
FIT001 – Hurricance Air Blow Valve
$16.00Hurricance Air Blow Valve. Use the Hurricane Air Blow Valve to control all compressed air tool applications for the Hurricane System. 1/4″ FNPT connection on both sides.
-
DSR241 – Pan-Grip Burst Bag
$46.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
BRE045 – 3/8″ Fiberglass Extension Brush Rod.
$10.003/8″ Fiberglass Extension Brush Rod. This is 48″ long and provides a rigid extension for duct brushes. Brush rod uses 1/4″ NPT connection. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR642-12 – 12″ Stiff Button-Lock Brush
$36.0012″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
STC206 – 6″ Floor Vent Hose Adaptor
$181.006″ Floor Vent Hose Adaptor. Use the 6″ Floor Vent Hose Adaptor in unconventional air duct cleaning system hook-ups. Down-Flow furnaces that run duct work through slab are hard to get to, but the 6″ Floor Vent Hose Adaptor solves the problem. 1″ access holes make for easy insertion of cleaning tools.
-
HDG010 – 10″ x 25′ Gator Vacuum Hose.
$310.0010″ x 25′ Gator Vacuum Hose. 10″ Gator Vacuum Hose is clear and green with polyolefin and polypropylene construction. 6″ Gator hose has an external all plastic helix and a smooth bore. 10″ Gator Hose is ideal for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning.
-
ENG060 – 6 Gallon Portable Fuel Cell
$76.006 Gallon Portable Fuel Cell. Fuel fittings not included.
-
ENG005 – Kohler Oversize Oil Filter for Command Series Pressure Lube Engines.
$12.00Kohler Oversize Oil Filter for Command Series Pressure Lube Engines. Use this Genuine Kohler Oil Filter for replacement parts on your General, Colonel, or Air Compressor. Kohler Genuine Oil Filters should be changed every 100 Hours.
-
DSR242 – Pan-Grip Cartridge
$48.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
PPE011 – DISPOSABLE RESPIRATOR, N95/KN95 or Equivalent, 10-Pack
$39.00PARTICULATE RESPIRATOR, MEETS NIOSH N-95/KN-95 OR EQUIVALENT, 10 Masks / Package
-
ZBG004 – 48″ diameter zone bag.
$183.0048″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
