1-800-728-3828
Meyer Machine Supply & Equipment

Shop

    • FIT054 – 1/4″ MNPT x Rectus Coupler

      $17.00

      1/4″ MNPT x Rectus Coupler.

    • FIT055 – 1/4″ Barb x Rectus Coupler

      $17.00

      1/4″ Barb x Rectus Coupler.

    • FIT078 – 1/4″ MNPT x Fuel Tank Fitting

      $16.00

      1/4″ MNPT x Fuel Tank Fitting.

    • FOG001 – Ultra-Low Volume Variable Flow Atomizing Fogger.

      $375.00

      Ultra-Low Volume Variable Flow Atomizing Fogger. The BGE Fogger has a 1-Gallon fluid tank to hold any chemical to fog, and a 48″ flexible hose. Fluid nozzle allows operator to control ratio of fluid to air while spraying. Use the FOG001 to spray in duct and HVAC chemicals such as BBJ Maintain C-1, Envirocon, Oxine AD, Micro-Coil Clean, Power-Coil Clean and many others.

    • FOG010 – Coil-Jet Sprayer with Wand

      $878.00

      Coil-Jet Sprayer with 24″ 90-Degree Tip Wand. No more dragging hoses or tearing out coils for cleaning. The CoilJet brings water, power and 100 psi of pressure with it, in a compact and portable design for on-the-go HVAC coil cleaning. Specifically designed for condenser coil cleaning and evaporator coil cleaning, the CoilJet replaces the too powerful pressure washer – and the not powerful enough pump sprayer – to quickly clean coils without damage to sensitive fins – even microchannel coils. The CoilJet holds 3 gallons of water and 1/2 gallon of cleaning solution. An adjustment knob allows the user to mix from straight water to a 4:1 water to solution mixture.

    • FOG011 – Coil-Jet Sprayer (NO WAND)

      $759.00

      Coil-Jet Sprayer with Wand. No more dragging hoses or tearing out coils for cleaning. The CoilJet brings water, power and 100 psi of pressure with it, in a compact and portable design for on-the-go HVAC coil cleaning. Specifically designed for condenser coil cleaning and evaporator coil cleaning, the CoilJet replaces the too powerful pressure washer – and the not powerful enough pump sprayer – to quickly clean coils without damage to sensitive fins – even microchannel coils. The CoilJet holds 3 gallons of water and 1/2 gallon of cleaning solution. An adjustment knob allows the user to mix from straight water to a 4:1 water to solution mixture.

    • FOG016 – Coil-Shot Sprayer Gun

      $103.00

      The CoilShot® condenser cleaner tool and tablet system make cleaning condenser coils faster and easier than ever before. The unit connects directly to a garden hose and uses a single pre-measured tablet to apply foaming coil cleaner directly to coils. For added cleaning performance, use it with the optional 3ft wand. The innovative technology quickly cleans coils of dirt, grime, and even grease*! Eliminate the need for lugging around and measuring heavy, bulky liquid coil cleaners.

    • FOG017 – Coil-Shot Wand Assembly

      $54.00

      3 ft. wand is specially designed to quickly connect to CoilShot cleaning tool and clean coils from inside to outside. The wand features a slim profile that fits between the grate so you don’t have to remove the top fan and housing.

    • FOG020 – The Squall

      $232.00

      The Squall Cold Mist Fogger Attachment. The Squall is a remote venturi air/liquid mixing nozzle, specifically designed for use in air ducts and on HVAC equipment. The design allows for a cleaning technician to attach it to standard compressed air duct cleaning extension lines like the Hurricane. Using compressed air its power source, the treatment liquid is drawn through the liquid line to the mixing nozzle where it is then sprayed out in a micro-drop mist. By leveraging the use of existing compressed air extension lines, the Squall cold mist fog can be applied from within the duct, providing consistent product application as the nozzle is retracted back toward the technician. Additionally, The Squall can be used for directed or general broadcast cold mist fog outside of an air duct.  Download Fogging Catalog Page.

    • FTB003 – Electrak 1 First Stage Filter

      $30.00

      Electrak 1 First Stage Filter. The Electrak 1 First Stage Filter, or Cube Filter, is designed to catch large debris in air stream that flows through your Electrak 1 HEPA Vacuum. Large items can be removed from this filter, and the filter should be changed every 2-3 jobs or as necessary. Good First Stage Filter maintenance protects second stage filters.

    • FTB020 – Electrak 1 Second Stage Filter

      $80.00

      Electrak 1 Second Stage Filter. The Electrak 1 Second Stage Pocket Filter is designed to catch the finer material that passes through the first stage filter, but is not destined for the HEPA. The Electrak 1 Second Stage Filter is ASHRAE 95% Efficient. Only the finest of particles are filtered by your HEPA pass through the Electrak 1 Second Stage Filter.

    • FTH024 – HEPA Filter Cartidge for Electrak Air Duct Vacuum Collector.

      $418.00

      HEPA Filter Cartidge for Electrak Air Duct Vacuum Collector. The replacment HEPA Filter for the Electrak is rated to clean the air to hospital grade (CLASS 100 Air) 99.97% efficient @ 0.3 microns. This filter panel cartridge can be used in either Eletrak 1 or 7 models and any other equipment that specs a 24″ x 24″ x 12″ HEPA Filter rated for 2,000 CFM or less. This filter has one gasketed side and is bidirectional, so it can accept airflow in both directions.

    • GBC001 – General Filter Bag.

      $208.00

      General Filter Bag. 4′ diameter x 7′ tall washable cloth bag. Sits atop dust collection bucket (not included), and is stabilized by guide rods (not included).

    • GBC002 – Ranger Filter Bag.

      $251.00

      Ranger Filter Bag. 4′ diameter x 10′ tall washable cloth filter bag. Sits atop dust collection bucket (not included), and stabilizes with guide rods (not included). AKA: Oversize General Bag

    • GBC006 – Duct Truck Dust Filter Bag, 6-Pack

      $217.00

      Duct Truck Dust Filter Bag. Replacement filters measure 20″ in diameter and 60″ in length. Filters will fit on collars up to 20″. Filters are sold in 6-Packs.

    • GBD002 – Disposable Insulation Containment Bag.

      $15.00

      Disposable Insulation Containment Bag. 4′ diameter x 6′ length. Disposable bag is made of throw-away breathable material. Bag volume is 75 cubic feet. Excellent filtration for removal of cellulose, fiberglass, rock-wool, vermiculite and other insulation materials.

    • GBD003 – Case of 10 Disposable Filter Bags.

      $100.00

      Case of 10 Disposable Filter Bags. 4′ diameter x 6′ length. Disposable bag is made of throw-away breathable material. Bag volume is 75 cubic feet. Excellent filtration for removal of cellulose, fiberglass, rock-wool, vermiculite and other insulation materials.

    • GBD004 – Case of 10 Heavy-Duty TOUGH Bags.

      $130.00

      Case of 10 Heavy-Duty Tough Disposable Filter Bags. 4′ diameter x 6′ length. Disposable bag is made of throw-away breathable material. Bag volume is 75 cubic feet. Excellent filtration for removal of cellulose, fiberglass, rock-wool, vermiculite and other insulation materials.  This product holds up better under TOUGH conditions than standard white insulation bag.

    • GBD005 – Electrak 7 First Stage Filter

      $9.00

      Electrak 7 First Stage Filter. The Electrak 7 First Stage Filter is a disposable fabric sack that catches the large debris in the air stream that will flow through your Electrak 7 HEPA Vacuum. The large debris can be removed from the sack, and the filter media should be changed on every job.

    • GBD007 – Electrak 7 First Stage Filter

      $78.00

      12- PACK – Electrak 7 First Stage Filter. The Electrak 7 First Stage Filter is a disposable fabric sack that catches the large debris in the air stream that will flow through your Electrak 7 HEPA Vacuum. The large debris can be removed from the sack, and the filter media should be changed on every job.

    • GBD011 – 27 Case Pallet

      $2,868.75

      (PALLET LOAD OF 27 CASES) *** INCLUSIVE OF 15% DISCOUNT *** – Case of 12 Top-Fill Insul-Bag Insulation Containment Bags. The Top-Fill design of the Insul-Bag is unique to Meyer Machine & Equipment, however this bag will fit any insulation vacuum. The Insul-Bag is specially designed to hold more material, rip less, fill better, and cost less than the conventional white insulation bags. Insul-Bag still provides excellent filtration for removal of cellulose, fiberglass, rock-wool, vermiculite and other insulation materials.

    • GBD011 – Case of 10 Top-Fill Insul-Bag Insulation Containment Bags

      $125.00

      Case of 12 Top-Fill Insul-Bag Insulation Containment Bags. The Top-Fill design of the Insul-Bag is unique to Meyer Machine & Equipment, however this bag will fit any insulation vacuum. The Insul-Bag is specially designed to hold more material, rip less, fill better, and cost less than the conventional white insulation bags. Insul-Bag still provides excellent filtration for removal of cellulose, fiberglass, rock-wool, vermiculite and other insulation materials.

    • GBD020 – Insul-Dumpster Cover

      $130.00

      The Insul-Dumpster Cover is leading the way in the Insulation Removal Industry. Insul-Bags can be costly and cumbersome on large scale jobs. Restoration projects requiring dumpster service make the Insul-Dumpster Cover a natural fit. Insul-Dumpster Covers are designed to fit standard roll-off dumpsters, 20-40 yard size. Discharge Hose Nozzle input allows a clean setup. Use the built-in shock cord to skirt around the dumpster body for a tight fit. Insul-Dumpster Cover is an economically savvy product when more than 12 bags will be used on a single job and a dumpster is present. The Insul-Dumpster Cover is made of a disposable filter media that can be discarded with removed material. Designed to fit Dumpster Body Size: 23.5′ Long x 8′ Wide.

    • GEL001 – HEPA Filtered Electrak 1 Power Vacuum.

      $5,500.00

      [pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2023/10/Poster_Electrak.pdf"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/06/Electrak_1.pdf"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/IOM_Electrak_1.pdf"]


      The NEWLY UPDATED S.M.A.R.T HEPA Filtered Electrak 1 Power Vacuum. The Electrak 1 is how great filtration and portability come together. 2,200 working CFM, 9″ static, Portable Design, and Hospital Grade HEPA Filtration.  Are you tired of popping circuit breakers?  The Electrak 1 Power Vacuum Collector makes this problem go away.  Cruise on AMPERAGE with S.M.A.R.T. (Sensor Managed Air Responsive Technology), and gain control of your filter changes with Filter Minders on every stage of filtration.

      If HVAC Air Duct Cleaning is your company’s main discipline or if it’s an ADD-ON Service, The Electrak 1 is the Vacuum/Collector to consider for jobs in Single Family Homes, Condominiums, Apartments, Office Buildings, Clean Rooms, and Hospitals.  The Electrak 1 comes standard with the industry’s best filtration, comprised of 3 stages to first remove large debris in the first stage cube filter, remove dirt and dust particles to ASHRAE 95% Efficiency in the second stage filter, and finally Hospital Grade Class 100 Air is expelled from the final stage HEPA filter.

      The Electrak 1 cabinets are constructed of ALL ALUMINUM to provide superior strength with minimal weight.  The integral hand-truck uses 10″ no-flat wheels to aid in transport over all surfaces including hard floors, carpet, grass & turf, stone/chip parking lots, and when traversing up and down stairways.  5″ pivoting casters allow for easy steering, and the removeable HEPA cabinet has (2) chest handles, and (4) pivoting casters for easy maneuvering.

      Airflow with The Electrak 1 is optimized through the combination of all it’s systems:  Large Filtration, 12″ Standard Hose Inlet, Variable Frequency Drive.  The Variable Frequency Drive, or VFD, allows for the Electrak 1 to have the flexibility to run on any 110-VOLT electrical circuit, and operate on Amperage Loads from 1/2 AMP – 20 AMPS.  Additionally, as dirt and debris are removed from the HVAC Air Duct System, the filters become clogged and more efficient.  This process naturally reduces the volumetric airflow of the vacuum system, diminishing it’s efficiency.  The Electrak’s VFD is able to overcome this natural phenomenon by over-speeding the motor to create higher than normal Static Pressure, and continue moving air through the vacuum/collector.  To put things simply, the VFD system on the Electrak allows for the vacuum system to maintain the maximum airflow through the filters taking into account the filter load and amperage available.

      When your HVAC Air Duct Cleaning Operation puts you in situations with large/oversize ductwork, or large buildings, use multiple Electrak 1 Vacuum/Collectors to increase volumetric airflow, and tackle small system components quickly.

    • GEL700 – HEPA Filtered Electrak 7 Power Vacuum.

      $10,950.00

      HEPA Filtered Electrak 7 Power Vacuum. The Electrak 7 will help you tackle the most demanding of all your commercial duct cleaning jobs. 4,400 working CFM, 9″ static, Portable Design, and Hospital Grade HEPA Filtration.

    • GEN007 – Dust Collection Bucket and Clamp

      $98.00

      Dust Bucket and Clamp. The General and Ranger Duct Cleaning Vacuums use this Dust Bucket and Clamp under the filter bag to collect dirt and debris. This heavy duty bucket and clamp allow for easy clean up after duct cleaning jobs. Use a trash liner to collect debris for easy removal. Bucket and Clamp are only sold together.

    • GEN200 – 20 HP General Power Vacuum.

      $5,200.00

      [pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/06/General.pdf" title="General.PDF Download"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/IOM_GENERAL.pdf"]

      20 HP General Power Vacuum. The General is All the Vacuum You’ll Need for Duct Cleaning. Kohler Command Engine, 5,250 CFM, Portable 4-Wheel Cart.

      If your Air Duct Cleaning Crew needs a vacuum collector with Serious Suction… Look No Further.  The General delivers ‘Duct-Truck’ like performance at a fraction of the price and without being tied to the curb.

      The General is the vacuum/collector you need for a powerful start in the air duct cleaning business. The General has the versatility to tackle residential, light commercial, and indsutrial application cleaning projects.

      The General is a high powered Gas Portable Air Duct Cleaning Vacuum that features a portable four-wheeled cart for placement at the job-site in the most opportunistic spot. On many residential air duct cleaning projects, the General can be connected to the air duct system with 50′-75′ of vacuum hose, allowing for maximum airflow by the vacuum.

      Excessive hose runs, and long setup times are a thing of the past when your cleaning crew operates The General. With average hose runs between 50′-75′, setup times for a two-man crew can be limited to 10 minutes; storing truck-loads of bulky hose for residential cleaning projects can be a problem of the past.

      The material handling fan-wheel on The General, allows for constant airflow of 5,250 CFM through the entire cleaning process. Dirty filters in the airstream are a non-issue with The General. An oversize cloth filter bag acts as the filter device, and a large cannister collects removed debris for disposal.

      As air duct cleaning projects increase in size, airflow should in turn also increase. The coupling of two General power vacuums together is an effective, low cost method for increasing airflow on projects that demand it. In light commercial and industrial applications, The General is capable of pulling through hose-runs up to 250′ in length. The General is also available with Alternate Fuel/Power Options including LP-GAS and Electric Motor. For industrial applications that allow the combustion of LP-GAS engines indoors, bring The General indoors to reduce hose runs and increase airflow. Filtration cabinets are available for LP-GAS and Electric Powered vacuum arrangements that can provide CLASS 100, HEPA filtered air.

      The General Air Duct Cleaning system can be comfortably set-up in a box truck or enclosed trailer, sized 6′ x 12′ or larger. Complete cleaning packages are available for all applications including residential, light commercial, industrial, and other special arrangements. Plan your custom package with the sales team, or choose from the popular arrangments that include The General, a powerful air compressor, vacuum hose, compressed air cleaning whips, duct brushes, tools, and materials necessary to access and make proper closure to many types of ductwork.

    • GEN401 – 31 HP Ranger Power Vacuum.

      $8,900.00

      [pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/06/Ranger.pdf"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/IOM_Ranger.pdf"]

      31 HP Ranger Power Vacuum. The Ranger is More Power for Duct Cleaning. Briggs & Stratton Engine, 7,000 CFM, Portable 4-Wheel Cart.  The Ranger comes complete with a 6-gallon  OSHA/EPA fuel tank attached to the machine.   Items included in vacuum package: 10′ tall filter bag (GBC002), dust collection bucket & clamp (GEN007), stainless steel guide rods (GEN026).  Vacuum hose is not included in vacuum package.  The Ranger is compatible with the HUM-V Assist Drive System, ordered as an additional item with your Ranger.

      The Ranger is the vacuum/collector that will give you a competitive edge in the air duct cleaning business. The Ranger has the versatility to tackle residential, light & heavy commercial, and indsutrial application cleaning projects. The Ranger is a high powered Gas Portable Air Duct Cleaning Vacuum that features a portable four-wheeled cart for placement at the job-site in the most opportunistic spot. On many residential air duct cleaning projects, the Ranger can be connected to the air duct system with 50′-75′ of vacuum hose, allowing for maximum airflow by the vacuum. Excessive hose runs, and long setup times are a thing of the past when your cleaning crew operates The Ranger. With average hose runs between 50′-75′, setup times for a two-man crew can be limited to 10 minutes; storing truck-loads of bulky hose for residential cleaning projects can be a problem of the past.

      With the Ranger, you’ll have more airflow available than most truck mount vacuums can deliver to the duct. The material handling fan-wheel on The Ranger, allows for constant airflow of 7,000 CFM through the entire cleaning process. Dirty filters in the airstream are a non-issue with The Ranger. An oversize cloth filter bag acts as the filter device, and a large cannister collects removed debris for disposal. As air duct cleaning projects increase in size, airflow should in turn also increase. The coupling of two Ranger power vacuums together is an effective, low cost method for increasing airflow on projects that demand it. In light commercial and industrial applications, The Ranger is capable of pulling through hose-runs up to 300′ in length. The Ranger is also available with Alternate Fuel/Power Options including LP-GAS and Electric Motor. For industrial applications that allow the combustion of LP-GAS engines indoors, bring The Ranger indoors to reduce hose runs and increase airflow. Filtration cabinets are available for LP-GAS and Electric Powered vacuum arrangements that can provide CLASS 100, HEPA filtered air.

      The Ranger Air Duct Cleaning system can be comfortably set-up in a box truck or enclosed trailer, sized 6′ x 12′ or larger. Complete cleaning packages are available for all applications including residential, light commercial, industrial, and other special arrangements. Plan your custom package with the sales team, or choose from the popular arrangments that include The Ranger, a powerful air compressor, vacuum hose, compressed air cleaning whips, duct brushes, tools, and materials necessary to access and make proper closure to many types of ductwork.

    Start typing and press Enter to search

    Shopping Cart

    No products in the cart.