-
PAT224-14 – Cammed-PSA Access Door,14″x14″
$37.00Cammed Access Door for Sheet Metal Duct Work. 14″ x 14″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
SLV010 – 10″ Diameter Hose Sleeve.
$37.0010″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 10″ hose.
-
CCV002 – Hose Coupling Wrap with Hook & Loop.
$38.00Hose Coupling Wrap with Hook & Loop. The Hose Coupling Wrap with Hook & Loop provides a protective wrap around your vacuum hose connections. Are you looking for extra protection around your hose sleeves, use the the Hose Coupling Wrap with Hook & Loop on vacuum hoses from 6″ – 12″ diameter.
-
DSR124 – Coil-Shot Tablets
$38.00The revolutionary CoilShot cleaning system is designed to offer fast and easy cleaning of residential and light commercial single-pass HVAC coils without the strain and bulkiness of using liquid coil cleaners.
-
AGR652-08 – 8″ Corner Button-Lock Brush
$39.008″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
DSR113 – Mini Split Replacement Bib Bag
$39.00The Mini-Split Bib Kit replacement bib is made from high grade 4 mil plastic that has been sonically welded to provide strong seams and high-performance time after time.
-
DSR122 – BBJ Micro-Coil Clean, 1/2 Gallon Concentrate
$39.00BBJ Micro Coil Clean is a biodegradable coil cleaning solution that is mild for the user and harmless to expensive HVAC/R equipment and the environment. It will remove built-up dirt and grime from coils resulting in improved system efficiency, reduced power consumption, and increased system life. It effectively cleans and deodorizes evaporator coils, heating coils, condenser coils, window units, air filters, blowers, and other dirty HVAC/R components. Concentrate mixes down to 10 gallons of product. Download MSDS
-
PPE011 – DISPOSABLE RESPIRATOR, N95/KN95 or Equivalent, 10-Pack
$39.00PARTICULATE RESPIRATOR, MEETS NIOSH N-95/KN-95 OR EQUIVALENT, 10 Masks / Package
-
DSR213 – Hardcast Iron-Grip 601 Indoor/Outdoor Fiber Free Gray. 1 Gallon
$40.00Hardcast Iron-Grip 601 Indoor/Outdoor Fiber Free Gray. Iron-Grip 601 is a versatile, all purpose, fiber-free, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Distinguished by its ability to accommodate minor vibration and movement, Iron-Grip stays flexible to save call-back labor. Iron-Grip’s excellent coverage rates and easy brush-on application provide low installed cost. Iron-Grip 601 is UL 181 B-M Listed Passes ASTM C-731, ASTM D-2202. USDA, EPA and FDA Approved. LEED compliant SCAQMD Rule 1168. City of Los Angeles Approval RR #8069 10 Year Outdoor Warranty when combined with an AFT-701 combination system.
-
AGR642-16 – 16″ Stiff Button-Lock Brush
$41.0016″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR652-12 – 12″ Corner Button-Lock Brush
$41.0012″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
ZBG005 – 18″ & 26″ Zone Bag Replacement Bladder
$41.0018″ & 26″ Zone Bag Replacement Bladder. Repair your Air Duct Cleaning Inflatable Zone Bag with this heavy-duty replacement bladder. Bladders are designed to work with 18″ & 26″ Zone Bags. Color of replacement bladder may differ from picture.
-
PAT007 – 8″ x 8″ Sheet metal duct patch, 25 pack.
$41.588″ x 8″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 6″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
-
DWV001 – Dryer Wall Vent, White
$41.95Dryer Wall Vent, White. The low profile DryerWallVent is a superior, safer choice for venting dryer exhaust to the exterior. The DryerWallVent’s large opening and angled damper provide maximum airflow efficiciency for safe venting of the dryer. Integrated magnets keep the damper closed when the dryer is not in use, keeping pests and elements on the outside. The larger vent opening makes cleaning and maintenance very accessible. Made in the USA from heavy 26 gauge Galvalume Steel.
-
-
DWV003 – Dryer Wall Vent, Tan
$41.95Dryer Wall Vent, Tan. The low profile DryerWallVent is a superior, safer choice for venting dryer exhaust to the exterior. The DryerWallVent’s large opening and angled damper provide maximum airflow efficiciency for safe venting of the dryer. Integrated magnets keep the damper closed when the dryer is not in use, keeping pests and elements on the outside. The larger vent opening makes cleaning and maintenance very accessible. Made in the USA from heavy 26 gauge Galvalume Steel.
-
DWV004 – Dryer Wall Vent, Black
$41.95Dryer Wall Vent, Black. The low profile DryerWallVent is a superior, safer choice for venting dryer exhaust to the exterior. The DryerWallVent’s large opening and angled damper provide maximum airflow efficiciency for safe venting of the dryer. Integrated magnets keep the damper closed when the dryer is not in use, keeping pests and elements on the outside. The larger vent opening makes cleaning and maintenance very accessible. Made in the USA from heavy 26 gauge Galvalume Steel.
-
CAS174 – Hurricane Spider Whip.
$42.00Hurricane Spider Whip. The Hurricane Spider Whip has eight tentacles and can be used in forward direction. The Hurricane Spider Whip has a better coverage rate than a single or triple whip, but less aggressive whipping action. This tool is ideal for cleaning trunk lines or main ducts. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS178 – Reverse Spinning Duct Ball with 4″ Lead.
$42.00Reverse Spinning Duct Ball with 4″ Lead. The Reverse Spinning Duct Ball with 4″ Lead is a versatile tool for both Air Duct Cleaning and Dryer Vent Cleaning. The Reverse Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Reverse Spinning Duct Ball is compatible with the Hurricane Whip System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS181 – Forward Spinning Duct Ball with 4″ Lead.
$42.00Forward Spinning Duct Ball with 4″ Lead. The Forward Spinning Duct Ball with 4″ Lead is a versatile tool for residential and light commerical Air Duct Cleaning. The Forward Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Forward Spinning Duct Ball is compatible with the Hurricane Whip System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
SLV012 – 12″ Diameter Hose Sleeve.
$42.0012″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 12″ hose.
-
DWV005 – Dryer Jack, Rooftop – Low Profile, Mill Finish
$42.15Low Profile Rooftop Dryer Jack, Mill Finish. The DryerJack, DWV005, is a low profile roof vent featuring a curved damper and large vent opening for optimal flow. The benefits include increased airflow throughout the dryer exhaust system, a wider, curved opening that keeps pests outside and easy access for cleaning and maintenance. Made in the USA from heavy 26 gauge Galvalume Steel.
-
VAC308 – Bucket Vac Replacement Filter Bags. 6-Pack.
$44.00Bucket Vac Replacement Filter Bags. 6-Pack.
-
TAP015 – Aluma Grip AFT-701 – Indoor/outdoor rolled mastic sealant – 4″ x 50′ roll
$45.00Aluma-Grip AFT-701 is a heavy-duty, pressure-sensitive, 40-year-cycle, duct joint rolled sealant. AFT-701 provides an aggressive water-resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC-coated duct, and duct wrap vapor barriers. AFT-701 is also suitable for sub-grade application on PVC-coated duct. Eligible for a 5-year stand-alone warranty and a 10-year warranty when used in the Foil-Sealant Sealing System.
-
PPE010 – 3-PLY FACE MASK, 50-Pack
$45.003-PLY FACE MASK (SURGICAL MASK STYLE, NO RATING), 50 Masks / Package.
-
ENG143 – 2.2 Gallon SureCan Gas Can
$45.00ENG143 – 2.2 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow.  By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position!  Not only is SureCan easy to use it is the most durable gas can on the market!
-
DSR241 – Pan-Grip Burst Bag
$46.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
CAS142 – Hurricane Dryer Vent Line.
$47.00Standard Hurricane Dryer Vent Line. The Hurricane Dryer Vent Line is a 30′ flexible tubing with a high velocity reverse bullet. The Dryer Vent Line requires a Dryer Vent Line Trigger (CAS130) or Hurricane Line (CAS148/CAS149) for operation. The Dryer Vent Line propels itself through duct work, breaking clogs and blowing loose material back through the opening. Use a Hurricane Trigger Valve (CAS130) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS174-R – Hurricane Reverse Spider Whip.
$47.00Hurricane Reverse Spider Whip. The Hurricane Reverse Spider Whip has eight tentacles and can be used in reverse direction. The Hurricane Spider Whip has a better coverage rate than a single or triple whip, but less aggressive whipping action. This tool is ideal for cleaning trunk lines or main ducts. It is recommended to use 2-1/2″ hole saw and duct plug for access openings. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
HCT017 – Lenox/Hilmor 3 inch Seamer
$47.00Lenox/Hilmor 3 inch Seamer. Professional quality hand tools are a must on the job site. Never be without a set of seamers when duct/pipe fitting is part of your job. Use the 3 inch Seamer to make small sheet metal bends and simple fabrications.
