-
PAT222-12 – Cammed-DT Access Door, 12″x12″
$28.00Cammed Access Door for Sheet Metal Duct Work. 12″ x 12″ Hinged Door is Secured with 2 Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.
-
PAT221-12 – Hinged-DT Access Door, 12″x12″
$28.00Hinged Access Door for Sheet Metal Duct Work. 12″ x 12″ Hinged Door is Secured with One Cam-Lock. Door contains 5/8″ knock-over tabs for easy installation.
-
PAT221-08 – Hinged-DT Access Door, 8″x8″
$24.00Hinged Access Door for Sheet Metal Duct Work. 8″ x 8″ Hinged Door is Secured with One Cam-Lock. Door contains 5/8″ knock-over tabs for easy installation.
-
PAT221-06 – Hinged-DT Access Door, 6″x6″
$21.00Hinged Access Door for Sheet Metal Duct Work. 6″ x 6″ Hinged Door is Secured with One Cam-Lock. Door contains 5/8″ knock-over tabs for easy installation.
-
PPE032 – Lock-Out Tag-Out Team Tag.
$26.00Lock-Out Tag-Out Team Tag. Lock-Out Tag-Out Team Tags allow for multiple tags to be attached on a single access. Lock-Out Tag-Out Team Tags accommodate up to 5 locks.
-
PPE031 – Lock-Out Tag-Out Personal Tag.
$5.00Lock-Out Tag-Out Personal Tag. Lock-Out Tag-Out Personal Tags are the First Step in Commercial Job-Site Safety. Keep track of who is in the work area with NAME, DEPT, and EXPECTED COMPLETION notes.
-
HCT022 – Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver
$31.00Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver. Professional quality hand tools are a must on the job site. This 9-in-1 driver tool puts the most common driver bits in the HVAC industry at your fingertips.
-
HCT013 – Lenox/Hilmor Aviation Tin Snips, LEFT
$24.00Lenox/Hilmor Aviation Tin Snips, LEFT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
ENG044 – Kohler Fuel Filter for CH11 – CH15.
$8.00Kohler Fuel Filter for CH11 – CH15. Use this Genuine Kohler Fuel Filter for replacement parts on your Colonel or Air Compressor. Kohler Genuine Fuel Filters should be changed every 200 Hours.
-
ENG029 – Kohler Air Filter for CH11 – CH15.
$16.00Kohler Air Filter for CH11 – CH15. Kohler Genuine Air Filters should be changed every 100 Hours.
-
DWV003 – Dryer Wall Vent, Tan
$41.95Dryer Wall Vent, Tan. The low profile DryerWallVent is a superior, safer choice for venting dryer exhaust to the exterior. The DryerWallVent’s large opening and angled damper provide maximum airflow efficiciency for safe venting of the dryer. Integrated magnets keep the damper closed when the dryer is not in use, keeping pests and elements on the outside. The larger vent opening makes cleaning and maintenance very accessible. Made in the USA from heavy 26 gauge Galvalume Steel.
-
DWV001 – Dryer Wall Vent, White
$41.95Dryer Wall Vent, White. The low profile DryerWallVent is a superior, safer choice for venting dryer exhaust to the exterior. The DryerWallVent’s large opening and angled damper provide maximum airflow efficiciency for safe venting of the dryer. Integrated magnets keep the damper closed when the dryer is not in use, keeping pests and elements on the outside. The larger vent opening makes cleaning and maintenance very accessible. Made in the USA from heavy 26 gauge Galvalume Steel.
-
DSR215 – Hardcast Flex-Grip 550 Indoor/Outdoor Fiber Free White. 1 Gallon
$27.00Hardcast Flex-Grip 550 Indoor/Outdoor Fiber Free White. 1 Gallon. Flex-Grip 550 is an all purpose, fiber-free, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Distinguished by its ability to accommodate minor vibration and movement, Flex-Grip 550 stays flexible to save call-back labor. Flex-Grip 550’s excellent coverage rates and easy brush-on application provide low installed cost. • UL 181 B-M Listed • Passes ASTM C-731, ASTM D-2202 • USDA, EPA and FDA Approved • LEED compliant • SCAQMD Rule 1168 • City of Los Angeles Approval RR #8069
-
DSR112 – Mini Split Bib Kit
$123.00The Mini-Split Bib Kit is the fastest way to clean ductless mini-split coils, blower wheels and more. If you are a contractor, you simply have to have one, or two, in your truck. This kit allows you to safely and quickly clean virtually any mini-split system the correct way using pressurized water on coils, blower wheels and more. The patented technology keeps water away from walls and other surroundings and directs it into the 5 gallon bucket for disposal, so it’s clean and safe all around.
-
DSR003 – Envirocon Spray Bottles.
$135.00Envirocon Spray Bottles. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product is unscented and contains 12-Quart sized spray bottles. 7-Day Lead time on all orders. Expedited shipping will not be honored. Download MSDS
-
CMP022 – 5-Stage Desiccant Air Dryer and Oil Separator.
$960.005-Stage Desiccant Air Dryer and Oil Separator. This oil separator is an important add-on piece of equipment for your Duct Cleaning or Dryer Vent Cleaning operation. Remove the moisture and vaporized oils from the air stream to prevent freezing air lines in cold weather, recontaminating clean ducts, and spraying moisture into areas that are water sensitive. Desiccant Dryer comes with simple L-Brackets for mounting. 40 micron water removing filter with 9 oz. bowl, sight glass, and overnight drain; .01 micron oil removing filter with 9 oz. bowl, sight glass, and overnight drain; 1 gallon desiccant filter to remove all water; Filter/Regulator with 3 micron filter, 9 oz. bowl, and sight glass to protect the regulator from any desiccant dust, and regulator gauge; Unit comes with ball valve and 1 gallon of desiccant beads.
-
CMP006 – 14 HP Tankless Screw Air Compressor
$6,695.0014 HP Tankless Screw Air Compressor. The CMP006 portable screw air compressor provides all the benefits of efficiency, constant air flow, low noise factor, and a reasonable price all into one compact unit. The CMP006 is built on a 3-wheel portable cart with a locking caster and push/pull handle. The CMP006 provides 30 CFM of constant airflow at 150 PSI, for compressed air performance that even the most taxing air duct cleaning crews need. The CMP006 is ideal for running compressed air tools from the Hurricane, 1/2″ Typhoon, Viper, Scorpion, and Dust-Devil product lines. The CMP006 can become even more productive with an in-line surge tank of 30-60 gallon to maintain higher line pressures and provide compressed tool performance for up to 3 users.
-
CMP004 – 14 HP Kohler Powered Truck-Mount Air Compressor
$4,496.0014 HP Kohler Powered Truck-Mount Air Compressor. This air compressor produces 24 CFM @ 175 PSI. The CMP004 pump utilizes Head-Unloading valves that operate more efficiently, and reduce wear on plumbing fittings in the airstream. The CMP004 utilizes a belt-guard mounted after-cooler that helps to bring system air near ambient temperatures, to help prolong the life of valves, and encourage the separation of water vapor to settle in the tank rather than expel through cleaning nozzles. The 30 gallon tank provides air storage suitable for a up to two technicians using Hurricane tools. The CMP004 is equipped with electric start (not shown in picture) and ready with recoil start if battery start fails.
-
CMP003 – 14 HP Kohler Powered Truck-Mount Air Compressor.
$3,696.0014 HP Kohler Powered Truck-Mount Air Compressor. This air compressor produces 18 CFM @ 175 PSI. The CMP003 pump utilizes a pneumatic pilot unloader valve that operates and controls the engine. The CMP003 utilizes a belt-guard mounted after-cooler that helps to bring system air near ambient temperatures, to help prolong the life of valves, and encourage the separation of water vapor to settle in the tank rather than expel through cleaning nozzles. The 30 gallon tank provides air storage suitable for a up to two technicians using Hurricane tools. The CMP003 is equipped with electric start (not shown in picture) and ready with recoil start if battery start fails.
-
CMP001E – 2 HP Portable Electric Air Compressor
$1,253.002 HP Portable Electric Air Compressor. This air compressor produces 7 CFM @ 125 PSI. The 10 gallon tank provides air storage suitable for a single technician to tackle residential dryer vent cleaning jobs with select Hurricane tools.
-
CAS505 – 1″ Typhoon Cleaning Kit x 100′
$920.001″ Typhoon Cleaning Kit. The 1″ Typhoon Kit is an air sweep tool for use with high volume air compressors (HVLP) that produce in excess of 50 CFM. The 1″ Typhoon Cleaning Kit comes complete with 100′ lay-flat air hose, 1″ Typhoon Cleaning Tip, and a full port shut-off ball valve. The 1″ Typhoon Cleaning Kit uses 2-Claw Universal Couplings.
-
CAS500 – 1/2″ Typhoon Cleaning Kit x 50′
$610.001/2″ Typhoon Cleaning Kit. The 1/2″ Typhoon Kit is a reverse air sweep tool for use with high volume air compressors (HVLP) that produce in excess of 30 CFM. The 1/2″ Typhoon Cleaning Kit comes complete with 50′ light-weight air hose, 1/2″ Typhoon Cleaning Tip, and a full port shut-off ball valve. The 1/2″ Typhoon Cleaning Kit uses 2-Claw Universal Couplings.
-
FOG011 – Coil-Jet Sprayer (NO WAND)
$759.00Coil-Jet Sprayer with Wand. No more dragging hoses or tearing out coils for cleaning. The CoilJet brings water, power and 100 psi of pressure with it, in a compact and portable design for on-the-go HVAC coil cleaning. Specifically designed for condenser coil cleaning and evaporator coil cleaning, the CoilJet replaces the too powerful pressure washer – and the not powerful enough pump sprayer – to quickly clean coils without damage to sensitive fins – even microchannel coils. The CoilJet holds 3 gallons of water and 1/2 gallon of cleaning solution. An adjustment knob allows the user to mix from straight water to a 4:1 water to solution mixture.
-
CAS119-M – 5′ Medium Hurricane Rod
$26.005′ Medium Hurricane Rod. Flexible Hurricane Rods are the ideal tool for compressed air cleaning of duct work in residential & light commercial settings. Use the 5′ Medium Hurricane Rods to connect extensions to reach down branch duct work up to 30′ in length.
-
AGR400 – Pneumatic Rotary Brushing Package
$2,065.0024 in nylon brush assembly, 24 in silica carbide brush assembly, 12 in nylon brush assembly, 12 in silica carbide brush assembly, Reversible air motor, Guide system, Multi-positional core assembly, (3) Sets of guide legs (adjust brush height in 1 in increments from 3 in to 11 in), 36 in extension rod with couplers, (4) 60 in extension rod with couplers, On/off control and pressure regulator, Forward air sweep assembly, (1)Â Â Reverse air sweep assembly, (1)Â Â Rugged road case
-
GBD011 – 27 Case Pallet
$2,868.75(PALLET LOAD OF 27 CASES) *** INCLUSIVE OF 15% DISCOUNT *** – Case of 12 Top-Fill Insul-Bag Insulation Containment Bags. The Top-Fill design of the Insul-Bag is unique to Meyer Machine & Equipment, however this bag will fit any insulation vacuum. The Insul-Bag is specially designed to hold more material, rip less, fill better, and cost less than the conventional white insulation bags. Insul-Bag still provides excellent filtration for removal of cellulose, fiberglass, rock-wool, vermiculite and other insulation materials.
-
VAC401 – Pac-Vac
$515.00HEPA FILTERED BACK-PACK VACUUM
– 5.5′ CRUSH-PROOF HOSE, 50′ CORD, 5-PIECE TOOL KIT
– 150 CFM, 100″ H2O LIFT
– 7-POINT ADJUSTABLE HARNESS -
GEL001 – HEPA Filtered Electrak 1 Power Vacuum.
$5,500.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2023/10/Poster_Electrak.pdf"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/06/Electrak_1.pdf"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/IOM_Electrak_1.pdf"]
The NEWLY UPDATED S.M.A.R.T HEPA Filtered Electrak 1 Power Vacuum. The Electrak 1 is how great filtration and portability come together. 2,200 working CFM, 9″ static, Portable Design, and Hospital Grade HEPA Filtration. Are you tired of popping circuit breakers? The Electrak 1 Power Vacuum Collector makes this problem go away. Cruise on AMPERAGE with S.M.A.R.T. (Sensor Managed Air Responsive Technology), and gain control of your filter changes with Filter Minders on every stage of filtration.
If HVAC Air Duct Cleaning is your company’s main discipline or if it’s an ADD-ON Service, The Electrak 1 is the Vacuum/Collector to consider for jobs in Single Family Homes, Condominiums, Apartments, Office Buildings, Clean Rooms, and Hospitals. The Electrak 1 comes standard with the industry’s best filtration, comprised of 3 stages to first remove large debris in the first stage cube filter, remove dirt and dust particles to ASHRAE 95% Efficiency in the second stage filter, and finally Hospital Grade Class 100 Air is expelled from the final stage HEPA filter.
The Electrak 1 cabinets are constructed of ALL ALUMINUM to provide superior strength with minimal weight. The integral hand-truck uses 10″ no-flat wheels to aid in transport over all surfaces including hard floors, carpet, grass & turf, stone/chip parking lots, and when traversing up and down stairways. 5″ pivoting casters allow for easy steering, and the removeable HEPA cabinet has (2) chest handles, and (4) pivoting casters for easy maneuvering.
Airflow with The Electrak 1 is optimized through the combination of all it’s systems: Large Filtration, 12″ Standard Hose Inlet, Variable Frequency Drive. The Variable Frequency Drive, or VFD, allows for the Electrak 1 to have the flexibility to run on any 110-VOLT electrical circuit, and operate on Amperage Loads from 1/2 AMP – 20 AMPS. Additionally, as dirt and debris are removed from the HVAC Air Duct System, the filters become clogged and more efficient. This process naturally reduces the volumetric airflow of the vacuum system, diminishing it’s efficiency. The Electrak’s VFD is able to overcome this natural phenomenon by over-speeding the motor to create higher than normal Static Pressure, and continue moving air through the vacuum/collector. To put things simply, the VFD system on the Electrak allows for the vacuum system to maintain the maximum airflow through the filters taking into account the filter load and amperage available.
When your HVAC Air Duct Cleaning Operation puts you in situations with large/oversize ductwork, or large buildings, use multiple Electrak 1 Vacuum/Collectors to increase volumetric airflow, and tackle small system components quickly.
-
INS301 – GC Botz Duct Inspection Camera Robot
$5,495.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2023/05/IOM_INS301.pdf"] HVAC Duct Inspection is now easier than ever. GC Industrial Inspection Botz brings new technology to the HVAC Cleaning, Ventilation, and Inspection industry. Fly through the duct work, literally, with this DRONE ON WHEELS… or the optional tracks. High Definition video from the front and rear of the bot makes inspection footage easy to make sense of and better for you to sell your cleaning project. Inspection Botz operate over their own secured WIFI Signal, and for extra large jobs small WIFI Extenders can be placed throughout the building to create a WIFI Mesh that keeps you connected at all times. Independently controlled roller wheels give Inspection Botz versatility to turn on a dime, and even drive sideways. The tilting camera head allows the Botz operator to pan left and right, as well as up and down to get a full detail of all in-duct components. Download the GC Inspection Botz app HERE!
-
HDF425 – DryerFlex 4-Ply Flexible Dryer Vent Transition Hose
$69.004-Ply DryerFlex Flexible Dryer Vent Transition Hose. DryerFlex, a safe and effective airflow-efficient dryer transitin duct, combines the ease of use and flexibility of wire bound foil flex hose with semi-rigid aluminum flex. It simplifies dryer connections and protects against dangerous kinks and bends. Other ducts bend and kink, restricting the airflow and allowing lint to accumulate in the dryer exhaust system to become a fire hazard. With DryerFlex, installations are easier and laundry areas are safer. A UL Listing of UL2158A is required by building code and appliance manufacturers. DryerFlex is UL2158A Listed. Kit includes 2 stainless steel DryerClamps. This product length is 25′.
