-
FOG010 – Coil-Jet Sprayer with Wand
$878.00Coil-Jet Sprayer with 24″ 90-Degree Tip Wand. No more dragging hoses or tearing out coils for cleaning. The CoilJet brings water, power and 100 psi of pressure with it, in a compact and portable design for on-the-go HVAC coil cleaning. Specifically designed for condenser coil cleaning and evaporator coil cleaning, the CoilJet replaces the too powerful pressure washer – and the not powerful enough pump sprayer – to quickly clean coils without damage to sensitive fins – even microchannel coils. The CoilJet holds 3 gallons of water and 1/2 gallon of cleaning solution. An adjustment knob allows the user to mix from straight water to a 4:1 water to solution mixture.
-
DSR244 – Pan-Grip Flex 2 gallon kit
$824.00Pan-Grip Flex is a multicomponent novolac based elastomeric epoxy product that is ideal for residential, commercial and industrial applications requiring high elongation in typical environments. It is able to withstand moisture, manage temperature changes, and adjust from freeze to thaw. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The elastomeric properties of Pan-Grip Flex make the product ideal for surfaces where slight movement is expected (i.e. AHU floor, etc.). The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer.
-
FOG011 – Coil-Jet Sprayer (NO WAND)
$759.00Coil-Jet Sprayer with Wand. No more dragging hoses or tearing out coils for cleaning. The CoilJet brings water, power and 100 psi of pressure with it, in a compact and portable design for on-the-go HVAC coil cleaning. Specifically designed for condenser coil cleaning and evaporator coil cleaning, the CoilJet replaces the too powerful pressure washer – and the not powerful enough pump sprayer – to quickly clean coils without damage to sensitive fins – even microchannel coils. The CoilJet holds 3 gallons of water and 1/2 gallon of cleaning solution. An adjustment knob allows the user to mix from straight water to a 4:1 water to solution mixture.
-
FOG001 – Ultra-Low Volume Variable Flow Atomizing Fogger.
$375.00Ultra-Low Volume Variable Flow Atomizing Fogger. The BGE Fogger has a 1-Gallon fluid tank to hold any chemical to fog, and a 48″ flexible hose. Fluid nozzle allows operator to control ratio of fluid to air while spraying. Use the FOG001 to spray in duct and HVAC chemicals such as BBJ Maintain C-1, Envirocon, Oxine AD, Micro-Coil Clean, Power-Coil Clean and many others.
-
DSR002 – Oxine AD 16 oz. – 6 Pack
$340.00Oxine AD for use in HVAC Air Ducts. Use Oxine AD to act as a static agent in HVAC Air Ducts. Static agents are those that prevent microorganisms from replicating and are the best alternative to a sanitizer. 16 oz. bottle concentrate mixes into 5 gallons of usable solution. 6 bottles to a case.Download MSDS
-
DSR232 – Smoke & Soot Post Fire Smoke Encapsulant & Odor Remover – Black
$315.00Hardcast Smoke & Soot is a spray-applied coating that resists microbial growth, locks down offensive particles, and removes odors from the air-stream of fugitive emissions from fire deposits below the detectable limit. Designed with an EPA registered chemical package, this coating was engineered to be used on ductwork and insulation that has been exposed to smoke and soot from a fire to negate the need to replace the entire duct by merely resurfacing the existing substrate.
-
DSR231 – Smoke & Soot Post Fire Smoke Encapsulant & Odor Remover – White
$315.00Hardcast Smoke & Soot is a spray-applied coating that resists microbial growth, locks down offensive particles, and removes odors from the air-stream of fugitive emissions from fire deposits below the detectable limit. Designed with an EPA registered chemical package, this coating was engineered to be used on ductwork and insulation that has been exposed to smoke and soot from a fire to negate the need to replace the entire duct by merely resurfacing the existing substrate.
-
DSR243 – Pan-Grip 1 gallon kit
$293.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR211 – RS-100 Interior Restoration Duct Sealant
$290.00RS-100 is a water-based spray sealant engineered to seal joints, penetrations and seams from inside of the HVAC ductwork. The superior physical properties of this non-tack sealant will meet and exceed the SMACNA pressure classes and its flexibility allows for system operation without cracking. RS-100 sealant is formulated with EPA registered chemicals to resist microbial growth on the surface of the sealant.
-
DSR001 – Oxine AD -12 Pack
$250.00Oxine AD for use in HVAC Air Ducts. Use Oxine AD to act as a static agent in HVAC Air Ducts. Static agents are those that prevent microorganisms from replicating and are the best alternative to a sanitizer. 12 vials to a case, each vial mixes into 1 Gallon of usable solution.Download MSDS
-
FOG020 – The Squall
$232.00The Squall Cold Mist Fogger Attachment. The Squall is a remote venturi air/liquid mixing nozzle, specifically designed for use in air ducts and on HVAC equipment. The design allows for a cleaning technician to attach it to standard compressed air duct cleaning extension lines like the Hurricane. Using compressed air its power source, the treatment liquid is drawn through the liquid line to the mixing nozzle where it is then sprayed out in a micro-drop mist. By leveraging the use of existing compressed air extension lines, the Squall cold mist fog can be applied from within the duct, providing consistent product application as the nozzle is retracted back toward the technician. Additionally, The Squall can be used for directed or general broadcast cold mist fog outside of an air duct. Download Fogging Catalog Page.
-
DSR212 – Hardcast Spray Seal, 5 Gal.
$220.00Hardcast Spray Seal, 5 Gal. Spray-Seal is an all-purpose high performance sprayable sealant for use on all types of metal duct, ?berglass duct board, duct fabric and ?ex duct. Distinguished by its ability to accommodate minor vibration and movement, Spray-Seal stays ?exible and will not crack. Spray-Seal decreases labor substantially and increases productivity while using less material. 10 Year Outdoor Warranty when combined with an AFT-701 combination system.
-
DSR222 – RE-500 Interior Coating/Insulation Encapsulant – Black
$195.00RE-500, now with complete one-coat coverage, is a high-performance, spray-applied insulation encapsulant and coating for use inside HVAC ductwork. RE-500 is formulated with EPA-registered chemicals to resist microbial growth on the surface of the coating. At 13 g/l, this low VOC coating is ideal for critical projects such as hospital and schools. The semi-gloss finish provides a non-stick surface that will inhibit fiberglass degradation and debris accumulation that could lead to mold and mildew growth.
-
DSR221 – RE-500 Interior Coating/Insulation Encapsulant – White
$195.00RE-500, now with complete one-coat coverage, is a high-performance, spray-applied insulation encapsulant and coating for use inside HVAC ductwork. RE-500 is formulated with EPA-registered chemicals to resist microbial growth on the surface of the coating. At 13 g/l, this low VOC coating is ideal for critical projects such as hospital and schools. The semi-gloss finish provides a non-stick surface that will inhibit fiberglass degradation and debris accumulation that could lead to mold and mildew growth.
-
DSR132 – BBJ Mold Control
$163.00BBJ Mold Control for HVAC Systems and Air Ducts, control and inhibit the growth of microorganisms – such as gram positive and gram negative bacteria, algae, and mold – in HVAC Systems and Air Ducts. Concentrate mixes down to 7.5 gallons of product. Download MSDS
-
DSR004 – Envirocon Spray Bottles.
$145.00Envirocon Spray Bottles. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product has a light peppermint scent and contains 12-Quart sized spray bottles. 7-Day Lead time on all orders. Expedited shipping will not be honored. Download MSDS
-
DSR006 – Envirocon 5-Gallon Jug. * SHIPPING DISCLAIMER 4.1 APPLIES
$135.00Envirocon 5-Gallon Jug. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product has a light peppermint scent and can be applied to an atomizing, variable flow fogger. 7-Day Lead time on all orders. Expedited shipping will not be honored.* SHIPPING DISCLAIMER 4.1 APPLIESDownload MSDS
-
DSR005 – Envirocon 5-Gallon Jug.* SHIPPING DISCLAIMER 4.1 APPLIES
$135.00Envirocon 5-Gallon Jug. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product is unscented and can be applied to an atomizing, variable flow fogger. 7-Day Lead time on all orders. Expedited shipping will not be honored. * SHIPPING DISCLAIMER 4.1 APPLIESDownload MSDS
-
DSR003 – Envirocon Spray Bottles.
$135.00Envirocon Spray Bottles. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product is unscented and contains 12-Quart sized spray bottles. 7-Day Lead time on all orders. Expedited shipping will not be honored. Download MSDS
-
DSR112 – Mini Split Bib Kit
$123.00The Mini-Split Bib Kit is the fastest way to clean ductless mini-split coils, blower wheels and more. If you are a contractor, you simply have to have one, or two, in your truck. This kit allows you to safely and quickly clean virtually any mini-split system the correct way using pressurized water on coils, blower wheels and more. The patented technology keeps water away from walls and other surroundings and directs it into the 5 gallon bucket for disposal, so it’s clean and safe all around.
-
FOG016 – Coil-Shot Sprayer Gun
$103.00The CoilShot® condenser cleaner tool and tablet system make cleaning condenser coils faster and easier than ever before. The unit connects directly to a garden hose and uses a single pre-measured tablet to apply foaming coil cleaner directly to coils. For added cleaning performance, use it with the optional 3ft wand. The innovative technology quickly cleans coils of dirt, grime, and even grease*! Eliminate the need for lugging around and measuring heavy, bulky liquid coil cleaners.
-
TAP014 – Foil Grip 1404 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Foil-Grip 1404-181-BFX is a UL 181B-FX listed pressures sensitive rolled mastic sealant. The Foil-Grip 1404-181-BFX has superior tack for instant grab strength to galvanized metal, flex duct, PVC coated pipe, and PVC coated ductwork for an immediate airtight bond. The foil facer/butyl adhesive composite provides excellent UV resistance coupled with outstanding water resistance. The easy tear provides a fast installation for airtight seals on above and below grade ductwork applications.
-
TAP013 – Foil Grip 1403 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Foil-Grip 1403-181BFX is a UL 181B-FX listed pressure sensitive, 40-year cycle, duct joint and general purpose rolled sealant. Foil-Grip 1403-181BFX provides an instant water resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC coated duct, and duct wrap vapor barriers. Foil-Grip 1403-181BFX is suitable for subgrade application on PVC coated duct and is ideal for replacement applications.
-
DSR010 – Decon7 HVAC Disinfectant
$54.00DECON 7 HVAC DISINFECTANT
– 3 PART D7 EVAPORATOR COIL AND HVAC DISINFECTING KIT
– 1 QUART -
FOG017 – Coil-Shot Wand Assembly
$54.003 ft. wand is specially designed to quickly connect to CoilShot cleaning tool and clean coils from inside to outside. The wand features a slim profile that fits between the grate so you don’t have to remove the top fan and housing.
-
DSR106 – BBJ FreshDuct Deodorizer Concentrate.
$52.00BBJ FreshDuct Deodorizer Concentrate. FreshDuct contains BBJ EnviroGard™, an encapsulation control agent that controls odors by both encapsulating and breaking down odor molecules, while time releasing a fresh fragrance. BBJ FreshDuct Odor Eliminator leaves the air fresh and clean. Our duct cleaning products are formulated with non-toxic and readily biodegradable ingredients meaning there is no need to evacuate the premises during application. This container can mix up to 5 gallons of RTU deodorizer. Download MSDS
-
TAP012 – Foil-Grip 1402 – Indoor/outdoor rolled mastic sealant – unprinted – 3″ x 100′ roll
$50.00Foil-Grip 1402 is a pressure-sensitive, 40-year cycle, duct joint and general purpose rolled mastic sealant. It provides an instant water-resistant grip to most surfaces including sheet metal, duct board, flex board, PVC-coated duct, and duct wrap vapor barriers. Foil-Grip 1402 is suitable for sub-grade application on PVC-coated duct.
-
DSR242 – Pan-Grip Cartridge
$48.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR241 – Pan-Grip Burst Bag
$46.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
TAP015 – Aluma Grip AFT-701 – Indoor/outdoor rolled mastic sealant – 4″ x 50′ roll
$45.00Aluma-Grip AFT-701 is a heavy-duty, pressure-sensitive, 40-year-cycle, duct joint rolled sealant. AFT-701 provides an aggressive water-resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC-coated duct, and duct wrap vapor barriers. AFT-701 is also suitable for sub-grade application on PVC-coated duct. Eligible for a 5-year stand-alone warranty and a 10-year warranty when used in the Foil-Sealant Sealing System.
