-
FOG010 – Coil-Jet Sprayer with Wand
$878.00Coil-Jet Sprayer with 24″ 90-Degree Tip Wand. No more dragging hoses or tearing out coils for cleaning. The CoilJet brings water, power and 100 psi of pressure with it, in a compact and portable design for on-the-go HVAC coil cleaning. Specifically designed for condenser coil cleaning and evaporator coil cleaning, the CoilJet replaces the too powerful pressure washer – and the not powerful enough pump sprayer – to quickly clean coils without damage to sensitive fins – even microchannel coils. The CoilJet holds 3 gallons of water and 1/2 gallon of cleaning solution. An adjustment knob allows the user to mix from straight water to a 4:1 water to solution mixture.
-
INS070 – Headset Inspection Viewer
$860.00Wireless Heaset Inspection System Viewer. Plugs into Video-Out (YELLOW) port of most camera inspection systems. 5″ color screen is mounted to headset, and is battery operated. Battery life is 2-5 hours and is able to recharged an included power adaptor.
-
DSR244 – Pan-Grip Flex 2 gallon kit
$824.00Pan-Grip Flex is a multicomponent novolac based elastomeric epoxy product that is ideal for residential, commercial and industrial applications requiring high elongation in typical environments. It is able to withstand moisture, manage temperature changes, and adjust from freeze to thaw. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The elastomeric properties of Pan-Grip Flex make the product ideal for surfaces where slight movement is expected (i.e. AHU floor, etc.). The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer.
-
CAS501 – 1/2″ Typhoon Cleaning Kit x 100′
$810.001/2″ Typhoon Cleaning Kit. The 1/2″ Typhoon Kit is a reverse air sweep tool for use with high volume air compressors (HVLP) that produce in excess of 30 CFM. The 1/2″ Typhoon Cleaning Kit comes complete with 100′ light-weight air hose, 1/2″ Typhoon Cleaning Tip, and a full port shut-off ball valve. The 1/2″ Typhoon Cleaning Kit uses 2-Claw Universal Couplings.
-
FOG011 – Coil-Jet Sprayer (NO WAND)
$759.00Coil-Jet Sprayer with Wand. No more dragging hoses or tearing out coils for cleaning. The CoilJet brings water, power and 100 psi of pressure with it, in a compact and portable design for on-the-go HVAC coil cleaning. Specifically designed for condenser coil cleaning and evaporator coil cleaning, the CoilJet replaces the too powerful pressure washer – and the not powerful enough pump sprayer – to quickly clean coils without damage to sensitive fins – even microchannel coils. The CoilJet holds 3 gallons of water and 1/2 gallon of cleaning solution. An adjustment knob allows the user to mix from straight water to a 4:1 water to solution mixture.
-
CAS520 – HVLP Foot Pedal Switch
$725.00HVLP Foot Pedal Switch. Use the HVLP Foot Pedal Switch to reduce the number of hands required to operate HVLP cleaning tools and increase productivity. The HVLP Foot Pedal Switch fits inline to your HVLP Cleaning tools. The HVLP Foot Pedal Switch uses 2-claw Universal Couplings.
-
AGR601 – Residential Button-Lock Rotary Brushing Kit
$617.00Residential Button-Lock Rotary Brushing Kit. The Residential Button-Lock Rotary Brushing Kit provides the brushes you’ll need to tackle just about every job. The kit includes 20′ and 30′ drill driven brushing shafts and 8 brushes. Brushes selection outfits you to clean flex duct, round pipe, rectangular duct, dryer vents and more. This rotary brushing cable and system is designed to be used with a clutch enabled drill.
-
CAS500 – 1/2″ Typhoon Cleaning Kit x 50′
$610.001/2″ Typhoon Cleaning Kit. The 1/2″ Typhoon Kit is a reverse air sweep tool for use with high volume air compressors (HVLP) that produce in excess of 30 CFM. The 1/2″ Typhoon Cleaning Kit comes complete with 50′ light-weight air hose, 1/2″ Typhoon Cleaning Tip, and a full port shut-off ball valve. The 1/2″ Typhoon Cleaning Kit uses 2-Claw Universal Couplings.
-
CAS300 – Deluxe Hurricane Package
$565.00Deluxe Hurricane Package. The Deluxe Hurricane Package includes the compressed air whips and blow nozzles needed to outfit an Air Duct Cleaner with the tools necessary to tackle most Residential and Light Commercial Air Duct and Dryer Vent Cleaning Jobs. This kit comes complete with two lead lines, 9 compressed air whips/nozzles, high power blow gun, and replacement whip material, Hurricane Riser Ball, and Hurricane Register Wand.
-
VAC402 – Mighty-Vac
$560.00WET/DRY CANNISTER CONTACT VACUUM
– 25′ CRUSH-PROOF HOSE, 35′ CORD, 5-PIECE TOOL KIT
– 250 CFM, 110″ H2O LIFT, 1200 WATT
– 8 GALLON TANK W/ 5-YEAR WARRANTY -
VAC401 – Pac-Vac
$515.00HEPA FILTERED BACK-PACK VACUUM
– 5.5′ CRUSH-PROOF HOSE, 50′ CORD, 5-PIECE TOOL KIT
– 150 CFM, 100″ H2O LIFT
– 7-POINT ADJUSTABLE HARNESS -
FTH024 – HEPA Filter Cartidge for Electrak Air Duct Vacuum Collector.
$418.00HEPA Filter Cartidge for Electrak Air Duct Vacuum Collector. The replacment HEPA Filter for the Electrak is rated to clean the air to hospital grade (CLASS 100 Air) 99.97% efficient @ 0.3 microns. This filter panel cartridge can be used in either Eletrak 1 or 7 models and any other equipment that specs a 24″ x 24″ x 12″ HEPA Filter rated for 2,000 CFM or less. This filter has one gasketed side and is bidirectional, so it can accept airflow in both directions.
-
IAQ003 – NADCA Vacuum Test Pump
$415.00NADCA Vacuum Test Air Sampling Pump. Rotary Vane Pump capable of 0-30 Liters/Minute (LPM). Operates on 115V. Pump includes flow control valve and tubing.
-
HDX008 – 8″ x 25′ Flexi-Flow Vacuum Hose.
$411.008″ x 25′ Flexi-Flow Vacuum Hose. 8″ Flexi-Flow Vacuum Hose is polyurethane construction with an ABS helix and smooth bore. 8″ Flexi-Flow Hose is ideal for open area insulation removal, and hooking up in tight spaces for duct cleaning. The smooth bore of 8″ Flexi-Flow Hose makes it the best hose to use on long run insulation and duct cleaning jobs. The polyurethane wall of Flexi-Flow Hose makes it the toughest hose for extreme applications like insulation removal, duct cleaning, soda suck-up, and more. Use the 8″ Vaculite hose as a discharge hose on your Commando or Colonel, or connect your 8″ Flexi-Flow Hose to duct work with the Snap Adpator or Tapered Starter Collar.
-
INS060 – Handheld Video Endoscope with Snapshot and Video Function. (w/ Screen)
$395.00Handheld Video Endoscope with Snapshot and Video Function with 4-1/2″ HD Screen. Use the Handheld Video Endoscope to make fast and critical video inspections in all duct work, through registers, and into components. The Handheld Video Endoscope features a color camera, 3 Meter (10-Foot) optic cable, adjustable LED lighting on the camera head, and a bright LED flashlight built into the handle. This item comes complete with 4.5″ color LCD display and can record still photographs and video with sound onto the 32GB MICRO-SD (TF-CARD) that is PRE-INSTALLED. This unit is powered by a USB-Rechargeable Lithium Battery. Optic cable comes with detachable accessories: magnet, 90-degree mirror, hook.
-
FOG001 – Ultra-Low Volume Variable Flow Atomizing Fogger.
$375.00Ultra-Low Volume Variable Flow Atomizing Fogger. The BGE Fogger has a 1-Gallon fluid tank to hold any chemical to fog, and a 48″ flexible hose. Fluid nozzle allows operator to control ratio of fluid to air while spraying. Use the FOG001 to spray in duct and HVAC chemicals such as BBJ Maintain C-1, Envirocon, Oxine AD, Micro-Coil Clean, Power-Coil Clean and many others.
-
CAS401 – Heavy-Duty Compressed Air Dryer Vent Cleaning Kit
$360.00Heavy-Duty Compressed Air Dryer Vent Cleaning Kit. This Compressed Air Dryer Vent Cleaning Kit is designed for contractors that want to clean 4″ Residential Dryer Vents with compressed air. This kit includes a 20′ Hurricane Line, Forward and Reverse Duct Ball, and a (2) Heavy-Duty 30′ Dryer Vent Line with Trigger. Operation of this kit is best when powered by an air compressor capable of producing at least 15 CFM @ 175 PSI. Heavy-Duty Line is designed for extreme heat conditions.
-
GEN930 – OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums
$348.00OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums. The bolt-on fuel cell kit comes with drill templates for retro-fit on older vacuums, new vacuums are pre-drilled and ready for installation. The kit includes a 6-gallon Flambeau tank, a heavy duty frame, the required hoses, and all the necessary hardware. Installation of this kit removes the necessity of detatchable fuel cells and any quick-disconnect fittings. Add this item to your new vacuum purchase. Carbon cannister (GEN933) not included. For CARB compliancy add P/N: GEN933 to your order.
-
DSR002 – Oxine AD 16 oz. – 6 Pack
$340.00Oxine AD for use in HVAC Air Ducts. Use Oxine AD to act as a static agent in HVAC Air Ducts. Static agents are those that prevent microorganisms from replicating and are the best alternative to a sanitizer. 16 oz. bottle concentrate mixes into 5 gallons of usable solution. 6 bottles to a case.Download MSDS
-
CAS201 – Residential Hurricane Package.
$335.00Residential Hurricane Package. The Residential Hurricane Package includes the compressed air whips and blow nozzles needed to get started cleaning Air Ducts. This kit comes complete with two lead lines and 6 compressed air whips/nozzles.
-
DSR232 – Smoke & Soot Post Fire Smoke Encapsulant & Odor Remover – Black
$315.00Hardcast Smoke & Soot is a spray-applied coating that resists microbial growth, locks down offensive particles, and removes odors from the air-stream of fugitive emissions from fire deposits below the detectable limit. Designed with an EPA registered chemical package, this coating was engineered to be used on ductwork and insulation that has been exposed to smoke and soot from a fire to negate the need to replace the entire duct by merely resurfacing the existing substrate.
-
DSR231 – Smoke & Soot Post Fire Smoke Encapsulant & Odor Remover – White
$315.00Hardcast Smoke & Soot is a spray-applied coating that resists microbial growth, locks down offensive particles, and removes odors from the air-stream of fugitive emissions from fire deposits below the detectable limit. Designed with an EPA registered chemical package, this coating was engineered to be used on ductwork and insulation that has been exposed to smoke and soot from a fire to negate the need to replace the entire duct by merely resurfacing the existing substrate.
-
HDG010 – 10″ x 25′ Gator Vacuum Hose.
$310.0010″ x 25′ Gator Vacuum Hose. 10″ Gator Vacuum Hose is clear and green with polyolefin and polypropylene construction. 6″ Gator hose has an external all plastic helix and a smooth bore. 10″ Gator Hose is ideal for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning.
-
DSR243 – Pan-Grip 1 gallon kit
$293.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR211 – RS-100 Interior Restoration Duct Sealant
$290.00RS-100 is a water-based spray sealant engineered to seal joints, penetrations and seams from inside of the HVAC ductwork. The superior physical properties of this non-tack sealant will meet and exceed the SMACNA pressure classes and its flexibility allows for system operation without cracking. RS-100 sealant is formulated with EPA registered chemicals to resist microbial growth on the surface of the sealant.
-
HDX006 – 6″ x 25′ Flexi-Flow Vacuum Hose.
$287.006″ x 25′ Flexi-Flow Vacuum Hose. 6″ Flexi-Flow Vacuum Hose is polyurethane construction with an ABS helix and smooth bore. 6″ Flexi-Flow Hose is ideal for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning. The smooth bore of 6″ Flexi-Flow Hose makes it the best hose to use on long run insulation and duct cleaning jobs. The polyurethane wall of Flexi-Flow Hose makes it the toughest hose for extreme applications like insulation removal, duct cleaning, soda suck-up, and more.
-
AGR603 – Button-Lock Dryer Vent Rotary Brushing Kit
$279.00Button-Lock Dryer Vent Rotary Brushing Kit. This kit contains a 30′ brushing shaft, and a 4″ & 6″ abrasive brush. Use this brush kit to chew through the toughest lint clogs and pull them back for containment.
-
HDG008 – 8″ x 25′ Gator Vacuum Hose.
$275.008″ x 25′ Gator Vacuum Hose. 8″ Gator Vacuum Hose is clear and green with polyolefin and polypropylene construction. 8″ Gator hose has an external all plastic helix and a smooth bore. 8″ Gator Hose is ideal for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning.
-
CAS400 – Compressed Air Dryer Vent Cleaning Kit
$265.00Compressed Air Dryer Vent Cleaning Kit. This Compressed Air Dryer Vent Cleaning Kit is designed for contractors that want to clean 4″ Residential Dryer Vents with compressed air. This kit includes a 20′ Hurricane Line, Forward and Reverse Duct Ball, and a (2) Standard 30′ Dryer Vent Line with Trigger. Operation of this kit is best when powered by an air compressor capable of producing at least 15 CFM @ 175 PSI.
-
RDC102 – 8″ x 8″ x 10″ Y-Hose Splitter.
$254.008″ x 8″ x 10″ Y-Hose Splitter. Adapt your vacuum hose run from ONE 10″ diameter hose to TWO 8″ diameter hoses. Use with the General or Ranger on small duct cleaning jobs to tackle the supply and return side the HVAC System at the same time. Construction is of #16 Ga. Steel for durability and long lasting use with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hose to hose collars. This fitting connects ONE 10″ diameter hose to TWO 8″ diameter hoses. Other sizes are available on Special Order.
