-
DSR003 – Envirocon Spray Bottles.
$135.00Envirocon Spray Bottles. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product is unscented and contains 12-Quart sized spray bottles. 7-Day Lead time on all orders. Expedited shipping will not be honored. Download MSDS
-
DSR002 – Oxine AD 16 oz. – 6 Pack
$340.00Oxine AD for use in HVAC Air Ducts. Use Oxine AD to act as a static agent in HVAC Air Ducts. Static agents are those that prevent microorganisms from replicating and are the best alternative to a sanitizer. 16 oz. bottle concentrate mixes into 5 gallons of usable solution. 6 bottles to a case.Download MSDS
-
DSR001 – Oxine AD -12 Pack
$250.00Oxine AD for use in HVAC Air Ducts. Use Oxine AD to act as a static agent in HVAC Air Ducts. Static agents are those that prevent microorganisms from replicating and are the best alternative to a sanitizer. 12 vials to a case, each vial mixes into 1 Gallon of usable solution.Download MSDS
-
DPL005 – 1″ diameter duct plugs.
$135.001″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 3,000 per package.
-
DPL003 – 1″ diameter duct plugs.
$32.001″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 500 per package.
-
DPL002 – 2-1/2″ diameter duct plugs.
$48.002-1/2″ diameter duct plugs. These soft plastic duct plugs fit inside a 2-1/2″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 16″ or larger. 100 per package.
-
DPL001 – 1″ diameter duct plugs.
$85.001″ diameter duct plugs. These hard plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit flush on flat surfaces and are not compatible with round duct work. 500 per package. *** THIS PRODUCT MAY DELIVER AS A SPECIAL ORDER, EXPECT A LEAD TIME OF 5-7 DAYS *** EXPEDITED SHIPPING WILL NOT BE HONORED FOR THIS ITEM.
-
CMP023 – Desiccant Refill Material, 1 Gallon Container.
$67.00Desiccant Refill Material, (4) 1 Gallon Containers. This desiccant changes color as it absorbs water, making it easy to know when a change is necessary. Blue = Dry, Pink = Wet. Reuse this desiccant after baking the moisture out in an oven. Use this refill material with the 5-Stage Desiccant Dryer, CMP022.
-
CMP022 – 5-Stage Desiccant Air Dryer and Oil Separator.
$960.005-Stage Desiccant Air Dryer and Oil Separator. This oil separator is an important add-on piece of equipment for your Duct Cleaning or Dryer Vent Cleaning operation. Remove the moisture and vaporized oils from the air stream to prevent freezing air lines in cold weather, recontaminating clean ducts, and spraying moisture into areas that are water sensitive. Desiccant Dryer comes with simple L-Brackets for mounting. 40 micron water removing filter with 9 oz. bowl, sight glass, and overnight drain; .01 micron oil removing filter with 9 oz. bowl, sight glass, and overnight drain; 1 gallon desiccant filter to remove all water; Filter/Regulator with 3 micron filter, 9 oz. bowl, and sight glass to protect the regulator from any desiccant dust, and regulator gauge; Unit comes with ball valve and 1 gallon of desiccant beads.
-
CMP006E – 7.5 HP, 230V, 3-Phase Tankless Screw Air Compressor
$7,200.007.5 HP, 230V, 3-Phase Tankless Screw Air Compressor. The CMP006E portable screw air compressor provides all the benefits of portability in a building, efficiency, constant air flow, low noise factor, and a reasonable price all into one compact unit. The CMP006E is built on a portable caster cart. The CMP006E provides 30 CFM of constant airflow at 150 PSI, for compressed air performance that even the most taxing air duct cleaning crews need. The CMP006E is ideal for running compressed air tools from the Hurricane, 1/2″ Typhoon, Viper, Scorpion, and Dust-Devil product lines. The CMP006E can become even more productive with an in-line surge tank of 30-60 gallons to maintain higher line pressures and provide compressed tool performance for up to 3 users. The CMP600E is also available mounted on a tank for semi-permanent installation, not shown in the picture.
-
CMP006 – 14 HP Tankless Screw Air Compressor
$6,695.0014 HP Tankless Screw Air Compressor. The CMP006 portable screw air compressor provides all the benefits of efficiency, constant air flow, low noise factor, and a reasonable price all into one compact unit. The CMP006 is built on a 3-wheel portable cart with a locking caster and push/pull handle. The CMP006 provides 30 CFM of constant airflow at 150 PSI, for compressed air performance that even the most taxing air duct cleaning crews need. The CMP006 is ideal for running compressed air tools from the Hurricane, 1/2″ Typhoon, Viper, Scorpion, and Dust-Devil product lines. The CMP006 can become even more productive with an in-line surge tank of 30-60 gallon to maintain higher line pressures and provide compressed tool performance for up to 3 users.
-
CMP005 – Champion Truck Mount Air Compressor
$8,200.00Champion Truck Mount Air Compressor. The Champion Truck Mount Air Compressor is powered by a Honda Engine, is packaged with a 30 gallon tank, and is capable of tank pressures up to 250 PSI. For applications where cleaning tools require large volumes of air, extra tank pressure acts as a larger storage vessel to reduce the run time on smaller systems. Product is manufactured in and ships from Champion facility in Chicago, IL area, allow 7 days for package production. Use this air compressor for residential and commercial jobs for any cleaning application with compressed air whip systems like the Hurricane.
-
CMP004 – 14 HP Kohler Powered Truck-Mount Air Compressor
$4,496.0014 HP Kohler Powered Truck-Mount Air Compressor. This air compressor produces 24 CFM @ 175 PSI. The CMP004 pump utilizes Head-Unloading valves that operate more efficiently, and reduce wear on plumbing fittings in the airstream. The CMP004 utilizes a belt-guard mounted after-cooler that helps to bring system air near ambient temperatures, to help prolong the life of valves, and encourage the separation of water vapor to settle in the tank rather than expel through cleaning nozzles. The 30 gallon tank provides air storage suitable for a up to two technicians using Hurricane tools. The CMP004 is equipped with electric start (not shown in picture) and ready with recoil start if battery start fails.
-
CMP003 – 14 HP Kohler Powered Truck-Mount Air Compressor.
$3,696.0014 HP Kohler Powered Truck-Mount Air Compressor. This air compressor produces 18 CFM @ 175 PSI. The CMP003 pump utilizes a pneumatic pilot unloader valve that operates and controls the engine. The CMP003 utilizes a belt-guard mounted after-cooler that helps to bring system air near ambient temperatures, to help prolong the life of valves, and encourage the separation of water vapor to settle in the tank rather than expel through cleaning nozzles. The 30 gallon tank provides air storage suitable for a up to two technicians using Hurricane tools. The CMP003 is equipped with electric start (not shown in picture) and ready with recoil start if battery start fails.
-
CMP002E – 5 HP Electric Powered Portable Air Compressor.
$3,450.005 HP Electric Powered Portable Air Compressor. This air compressor produces 15.4 CFM @ 175 PSI. The 17 gallon tank provides air storage suitable for a single technician and Hurricane tools. Electric motor requires 220 volt Single Phase electricity.
-
CMP002 – 8.5 HP Honda Powered Portable Air Compressor
8.5 HP Honda Powered Portable Air Compressor. This air compressor produces 16 CFM @ 175 PSI. The 10 gallon tank provides air storage suitable for a single technician and Hurricane tools. This portable air compressor features a wheel barrow setup with a large no-flat wheel, and a 4-point landing pad that removes the load from the wheel when at rest. Air manifold features (2) 1/4″ quick connect couplers and a pressure regulator that can be adjusted from 0 PSI to full tank pressure. This compressor will load and unload at 145-175 PSI and is most suitable for dryer vent cleaning and light duty HVAC air duct cleaning operations. This engine is equipped with an electric start package, however a 12-volt battery is not supplied to power the starter motor. All piston compressors are rated for 50% duty-cycle. This air compressor is Proudly Manufactured in the USA.
-
CMP001E – 2 HP Portable Electric Air Compressor
$1,253.002 HP Portable Electric Air Compressor. This air compressor produces 7 CFM @ 125 PSI. The 10 gallon tank provides air storage suitable for a single technician to tackle residential dryer vent cleaning jobs with select Hurricane tools.
-
CMP001 – 5.5 HP Portable Air Compressor
$1,216.005.5 HP Portable Air Compressor. This air compressor produces 12 CFM @ 125 PSI. The 10 gallon tank provides air storage suitable for a single technician to tackle residential dryer vent cleaning jobs with select Hurricane tools.
-
CLP021 – 10″ Quick Clamp
$26.0010″ Quick Clamp. The 10″ Quick Clamp is the fastest way to secure your washable filter bag to the General and Ranger power vacuum. The 10″ Quick Clamp fits around collar sizes that measure 10″ diameter and comes with a cotter pin for locking.
-
CLP019 – 5/8″ Pinch Clamp
$2.005/8″ Pinch Clamp. Use the 5/8″ Pinch Clamp for reconnection of 5/8″ O.D. tubing on 3/8″ hose barb. Crimping tool is necessary to create proper closure of clamp.
-
CLP011 – 9/16″ Pinch Clamp
$2.009/16″ Pinch Clamp. Use the 9/16″ Pinch Clamp for reconnection of 1/2″-9/16″ O.D. tubing on hose barb. Crimping tool is necessary to create proper closure of clamp.
-
CLP010 – 3/8″ Pinch Clamp
$2.003/8″ Pinch Clamp. Use the 3/8″ Pinch Clamp for reconnection of 3/8″ O.D. tubing or hose on 1/4″ hose barb. Crimping tool is necessary to create proper closure of clamp.
-
CLP004 – 2″ – 12″ Adjustable Hose Clamp
$5.002″ – 12″ Adjustable Hose Clamp. Use this 2″ – 12″ Adjustable Hose Clamp to secure vacuum hoses to inlet collars, duct adaptor collars, hose sleeves & reducers, or any other place you hook vacuum hoses up. This quick clamp allows for 5/16″ nut driver or screw driver to tighten, and screw mechanism flips up for quick tighten and release.
-
CCV002 – Hose Coupling Wrap with Hook & Loop.
$38.00Hose Coupling Wrap with Hook & Loop. The Hose Coupling Wrap with Hook & Loop provides a protective wrap around your vacuum hose connections. Are you looking for extra protection around your hose sleeves, use the the Hose Coupling Wrap with Hook & Loop on vacuum hoses from 6″ – 12″ diameter.
-
CAS520 – HVLP Foot Pedal Switch
$725.00HVLP Foot Pedal Switch. Use the HVLP Foot Pedal Switch to reduce the number of hands required to operate HVLP cleaning tools and increase productivity. The HVLP Foot Pedal Switch fits inline to your HVLP Cleaning tools. The HVLP Foot Pedal Switch uses 2-claw Universal Couplings.
-
CAS510 – Twister Riser Cleaning Kit
$2,775.00Twister Riser Cleaning Kit. The Twister Riser Cleaning Kit is the GO-TO-Tool for air sweep cleaning of vertical risers. The Twister Riser Cleaning Kit blasts a rotating stream of air that sweeps the surface of a vertical riser sized 30″ or less. The Twister Riser Cleaning Kit is for use with high volume compressors (HLPV) that produce in excess of 75 CFM. The Twister Riser Cleaning Kit comes complete with 100′ lay-flat hose and shut-off valve. The Twister Riser Cleaning Kit uses 2-claw Universal Couplings.
-
CAS505 – 1″ Typhoon Cleaning Kit x 100′
$920.001″ Typhoon Cleaning Kit. The 1″ Typhoon Kit is an air sweep tool for use with high volume air compressors (HVLP) that produce in excess of 50 CFM. The 1″ Typhoon Cleaning Kit comes complete with 100′ lay-flat air hose, 1″ Typhoon Cleaning Tip, and a full port shut-off ball valve. The 1″ Typhoon Cleaning Kit uses 2-Claw Universal Couplings.
-
CAS501 – 1/2″ Typhoon Cleaning Kit x 100′
$810.001/2″ Typhoon Cleaning Kit. The 1/2″ Typhoon Kit is a reverse air sweep tool for use with high volume air compressors (HVLP) that produce in excess of 30 CFM. The 1/2″ Typhoon Cleaning Kit comes complete with 100′ light-weight air hose, 1/2″ Typhoon Cleaning Tip, and a full port shut-off ball valve. The 1/2″ Typhoon Cleaning Kit uses 2-Claw Universal Couplings.
-
CAS500 – 1/2″ Typhoon Cleaning Kit x 50′
$610.001/2″ Typhoon Cleaning Kit. The 1/2″ Typhoon Kit is a reverse air sweep tool for use with high volume air compressors (HVLP) that produce in excess of 30 CFM. The 1/2″ Typhoon Cleaning Kit comes complete with 50′ light-weight air hose, 1/2″ Typhoon Cleaning Tip, and a full port shut-off ball valve. The 1/2″ Typhoon Cleaning Kit uses 2-Claw Universal Couplings.
-
CAS401 – Heavy-Duty Compressed Air Dryer Vent Cleaning Kit
$360.00Heavy-Duty Compressed Air Dryer Vent Cleaning Kit. This Compressed Air Dryer Vent Cleaning Kit is designed for contractors that want to clean 4″ Residential Dryer Vents with compressed air. This kit includes a 20′ Hurricane Line, Forward and Reverse Duct Ball, and a (2) Heavy-Duty 30′ Dryer Vent Line with Trigger. Operation of this kit is best when powered by an air compressor capable of producing at least 15 CFM @ 175 PSI. Heavy-Duty Line is designed for extreme heat conditions.
