-
IAQ004 – NADCA Vacuum Test Calibration Meter
$129.00NADCA Vacuum Test Pump Calibration Meter. Use this calibration device before every NADCA Vacuum Test sample is taken. Connect a sampling cassette to the pump tubing, and connect the calibration device to the ‘SAMPLE’ side of the cassette. Adjust the flow control on the pump to the desire flow level. After calibration, connect a clean sampling cassette and proceed with NADCA Vacuum Test.
-
IAQ003 – NADCA Vacuum Test Pump
$415.00NADCA Vacuum Test Air Sampling Pump. Rotary Vane Pump capable of 0-30 Liters/Minute (LPM). Operates on 115V. Pump includes flow control valve and tubing.
-
IAQ002 – NADCA Vacuum Test Template
$9.00NADCA Vacuum Test Template. Per the ACR-2013 NADCA Standard 5.4.1, this template is .015″ in thickness and contains 2 sample areas 2 cm x 25 cm in parallel sepated by 2.5 cm.
-
IAQ001 – NADCA Vacuum Test Cassette. Indiviual Package.
$13.00NADCA Vacuum Test Cassette. 37mm 3-piece air sampling filter cassette preloaded with 0.8 micron MCE filters that are matched in weight to within 50µg. Includes security band. Individual Package. Gravimetric Analytical testing can done at any facility based on using the NIOSH Method 0500 – Total Nuissance Dust. Recommended Vendor: EMSL Analytical, Inc.
-
HSW003 – 2-1/2″ Lenox Bi-Metal Hole Saw.
$25.002-1/2″ Lenox Bi-Metal Hole Saw. This tough hole saw is great for making 2-1/2″ holes in sheet metal, wood, or other fibrous materials. This hole saw comes complete with pilot bit and fits in any drill with a 3/8″ or larger chuck.
-
HSW001 – 1″ Lenox Bi-Metal Hole Saw.
$16.001″ Lenox Bi-Metal Hole Saw. This tough hole saw is great for making 1″ holes in sheet metal, wood, or other fibrous materials. This hole saw comes complete with pilot bit and fits in any drill with a 3/8″ or larger chuck.
-
HDX008 – 8″ x 25′ Flexi-Flow Vacuum Hose.
$411.008″ x 25′ Flexi-Flow Vacuum Hose. 8″ Flexi-Flow Vacuum Hose is polyurethane construction with an ABS helix and smooth bore. 8″ Flexi-Flow Hose is ideal for open area insulation removal, and hooking up in tight spaces for duct cleaning. The smooth bore of 8″ Flexi-Flow Hose makes it the best hose to use on long run insulation and duct cleaning jobs. The polyurethane wall of Flexi-Flow Hose makes it the toughest hose for extreme applications like insulation removal, duct cleaning, soda suck-up, and more. Use the 8″ Vaculite hose as a discharge hose on your Commando or Colonel, or connect your 8″ Flexi-Flow Hose to duct work with the Snap Adpator or Tapered Starter Collar.
-
HDX006 – 6″ x 25′ Flexi-Flow Vacuum Hose.
$287.006″ x 25′ Flexi-Flow Vacuum Hose. 6″ Flexi-Flow Vacuum Hose is polyurethane construction with an ABS helix and smooth bore. 6″ Flexi-Flow Hose is ideal for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning. The smooth bore of 6″ Flexi-Flow Hose makes it the best hose to use on long run insulation and duct cleaning jobs. The polyurethane wall of Flexi-Flow Hose makes it the toughest hose for extreme applications like insulation removal, duct cleaning, soda suck-up, and more.
-
PPE032 – Lock-Out Tag-Out Team Tag.
$26.00Lock-Out Tag-Out Team Tag. Lock-Out Tag-Out Team Tags allow for multiple tags to be attached on a single access. Lock-Out Tag-Out Team Tags accommodate up to 5 locks.
-
PPE031 – Lock-Out Tag-Out Personal Tag.
$5.00Lock-Out Tag-Out Personal Tag. Lock-Out Tag-Out Personal Tags are the First Step in Commercial Job-Site Safety. Keep track of who is in the work area with NAME, DEPT, and EXPECTED COMPLETION notes.
-
PPE030 – Lock-Out Tag-Out Pad Lock
$26.00Lock-Out Tag-Out Pad Lock. MASTER Brand Lock-Out Tag-Out Safety Pad Locks. These locks are color coded and each individual lock has a unique key-set. Master Lock-Out Tag-Out Pad Locks come in six colors: Red, Blue, Yellow, Green, Orange, Black. If specific colors are desired, make request in order notes.
-
HDV112 – 12″ x 25′ Voluvent Vacuum Hose.
$226.0012″ x 25′ Voluvent Vacuum Hose. 12″ Voluvent Vacuum Hose is polyvinyl chloride construction with a wire helix. The 10″ Voluvent Hose is extremely flexible and collapses laterally under vacuum. 12″ Voluvent Hose is ideal for use in duct cleaning application with electric HEPA vacuums such as the Electrak series. Connect 12″ Voluvent Hose to duct work with a Snap Adaptor or Tapered Starter Collar.
-
HDV110 – 10″ x 25′ Voluvent Vacuum Hose.
$194.0010″ x 25′ Voluvent Vacuum Hose. 10″ Voluvent Vacuum Hose is polyvinyl chloride construction with a wire helix. The 10″ Voluvent Hose is extremely flexible and collapses laterally under vacuum. 10″ Voluvent Hose is ideal for use in duct cleaning application with electric HEPA vacuums such as the Electrak series. Connect 10″ Voluvent Hose to duct work with a Snap Adaptor or Tapered Starter Collar.
-
HDV108 – 8″ x 25′ Voluvent Vacuum Hose.
$163.008″ x 25′ Voluvent Vacuum Hose. 8″ Voluvent Vacuum Hose is polyvinyl chloride construction with a wire helix. The 8″ Voluvent Hose is extremely flexible and collapses laterally under vacuum. 8″ Voluvent Hose is ideal for use in duct cleaning application with electric HEPA vacuums such as the Electrak series. Connect 8″ Voluvent Hose to duct work with a Snap Adaptor or Tapered Starter Collar.
-
HDV004 – 4″ x 50′ Vaculite Vacuum Hose.
$158.004″ x 50′ Vaculite Vacuum Hose. 4″ Vaculite Vacuum Hose is all plastic with an exterior helix and semi-smooth bore. 4″ Vaculite Hose is ideal for reaching into tight spaces for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning.
-
HDV003 – 3″ x 50′ Vaculite Vacuum Hose.
$112.003″ x 50′ Vaculite Vacuum Hose. 3″ Vaculite Vacuum Hose is all plastic with an exterior helix and semi-smooth bore. 3″ Vaculite Hose is ideal for insulation blowing applications. The semi-smooth bore of the hose helps to further condition material as it tumbles through the hose.
-
HDV002 – 2-1/2″ x 50′ Vaculite Vacuum Hose.
$104.002-1/2″ x 50′ Vaculite Vacuum Hose. 2-1/2″ Vaculite Vacuum Hose is all plastic with an exterior helix and semi-smooth bore. 2-1/2″ Vaculite Hose is ideal for insulation blowing applications. The semi-smooth bore of the hose helps to further condition material as it tumbles through the hose.
-
HDG010 – 10″ x 25′ Gator Vacuum Hose.
$310.0010″ x 25′ Gator Vacuum Hose. 10″ Gator Vacuum Hose is clear and green with polyolefin and polypropylene construction. 6″ Gator hose has an external all plastic helix and a smooth bore. 10″ Gator Hose is ideal for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning.
-
HDG008 – 8″ x 25′ Gator Vacuum Hose.
$275.008″ x 25′ Gator Vacuum Hose. 8″ Gator Vacuum Hose is clear and green with polyolefin and polypropylene construction. 8″ Gator hose has an external all plastic helix and a smooth bore. 8″ Gator Hose is ideal for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning.
-
HDG006 – 6″ x 25′ Gator Vacuum Hose.
$230.006″ x 25′ Gator Vacuum Hose. 6″ Gator Vacuum Hose is clear and green with polyolefin and polypropylene construction. 6″ Gator hose has an external all plastic helix and a smooth bore. 6″ Gator Hose is ideal for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning.
-
HDF408 – DryerFlex 4-Ply Flexible Dryer Vent Transition Hose
$27.854-Ply DryerFlex Flexible Dryer Vent Transition Hose. DryerFlex, a safe and effective airflow-efficient dryer transitin duct, combines the ease of use and flexibility of wire bound foil flex hose with semi-rigid aluminum flex. It simplifies dryer connections and protects against dangerous kinks and bends. Other ducts bend and kink, restricting the airflow and allowing lint to accumulate in the dryer exhaust system to become a fire hazard. With DryerFlex, installations are easier and laundry areas are safer. A UL Listing of UL2158A is required by building code and appliance manufacturers. DryerFlex is UL2158A Listed. Kit includes 2 stainless steel DryerClamps. This product length is 96″ (8′).
-
HDF404 – DryerFlex 4-Ply Flexible Dryer Vent Transition Hose
$14.504-Ply DryerFlex Flexible Dryer Vent Transition Hose. DryerFlex, a safe and effective airflow-efficient dryer transitin duct, combines the ease of use and flexibility of wire bound foil flex hose with semi-rigid aluminum flex. It simplifies dryer connections and protects against dangerous kinks and bends. Other ducts bend and kink, restricting the airflow and allowing lint to accumulate in the dryer exhaust system to become a fire hazard. With DryerFlex, installations are easier and laundry areas are safer. A UL Listing of UL2158A is required by building code and appliance manufacturers. DryerFlex is UL2158A Listed. Kit includes 2 stainless steel DryerClamps. This product length is 48″ (4′).
-
HCT024 – Lenox/Hilmor 6-in-1 Stubby Multi-Driver
$13.00Lenox/Hilmor 6-in-1 Stubby Multi-Driver. Professional quality hand tools are a must on the job site. This 6-in-1 driver tools puts some of the most common driver bits at your finger tips in a STUBBY Style driver.
-
HCT022 – Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver
$31.00Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver. Professional quality hand tools are a must on the job site. This 9-in-1 driver tool puts the most common driver bits in the HVAC industry at your fingertips.
-
HCT021 – Lenox/Hilmor 1/4 & 5/16 Quick-Change Nut Driver
$26.00Lenox/Hilmor 1/4 & 5/16 Quick-Change Nut Driver. Professional quality hand tools are a must on the job site. Never be without a professional nut driving tool to remove and install the most common sized screw heads in the HVAC industry.
-
HCT020 – Lenox/Hilmor 12-in-1 Fin Comb
$25.00Lenox/Hilmor 12-in-1 Fin Comb. Professional quality hand tools are a must on the job site. Never clean or maintain a cooling coil without repairing damaged fins. Use the 12-in-1 Fin Comb to straighten bent over fins, restoring coil efficiecy.
-
HCT019 – Lenox/Hilmor Duct Knife.
$26.00Lenox/Hilmor Duct Knife. Professional quality hand tools are a must on the job site. Never be without a dual sided, specially purposed Duct Knife when the job requires. Make clean cuts through duct insulation or duct board.
-
HCT018 – Lenox/Hilmor 1 inch V-Notcher
$36.00Lenox/Hilmor 1 inch V-Notcher. Professional quality hand tools are a must on the job site. Never be without a set of notchers when duct/pipe fitting is part of your job. Use the 1 inch notcher to make small sheet metal notches for simple fabrications.
-
HCT017 – Lenox/Hilmor 3 inch Seamer
$47.00Lenox/Hilmor 3 inch Seamer. Professional quality hand tools are a must on the job site. Never be without a set of seamers when duct/pipe fitting is part of your job. Use the 3 inch Seamer to make small sheet metal bends and simple fabrications.
-
HCT016 – Lenox/Hilmor 3-Blade Sheet Metal Crimper
$24.00Lenox/Hilmor 3-Blade Sheet Metal Crimper. Professional quality hand tools are a must on the job site. Never be without a set of crimpers when duct/pipe fitting is part of your job. Use the 3-Blade Crimpers to fit same-size sheet metal snap-lock pipe end to end with ease.
