-
DWV005 – Dryer Jack, Rooftop – Low Profile, Mill Finish
$42.15Low Profile Rooftop Dryer Jack, Mill Finish. The DryerJack, DWV005, is a low profile roof vent featuring a curved damper and large vent opening for optimal flow. The benefits include increased airflow throughout the dryer exhaust system, a wider, curved opening that keeps pests outside and easy access for cleaning and maintenance. Made in the USA from heavy 26 gauge Galvalume Steel.
-
SLV012 – 12″ Diameter Hose Sleeve.
$42.0012″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 12″ hose.
-
CAS181 – Forward Spinning Duct Ball with 4″ Lead.
$42.00Forward Spinning Duct Ball with 4″ Lead. The Forward Spinning Duct Ball with 4″ Lead is a versatile tool for residential and light commerical Air Duct Cleaning. The Forward Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Forward Spinning Duct Ball is compatible with the Hurricane Whip System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS178 – Reverse Spinning Duct Ball with 4″ Lead.
$42.00Reverse Spinning Duct Ball with 4″ Lead. The Reverse Spinning Duct Ball with 4″ Lead is a versatile tool for both Air Duct Cleaning and Dryer Vent Cleaning. The Reverse Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Reverse Spinning Duct Ball is compatible with the Hurricane Whip System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS174 – Hurricane Spider Whip.
$42.00Hurricane Spider Whip. The Hurricane Spider Whip has eight tentacles and can be used in forward direction. The Hurricane Spider Whip has a better coverage rate than a single or triple whip, but less aggressive whipping action. This tool is ideal for cleaning trunk lines or main ducts. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
DWV004 – Dryer Wall Vent, Black
$41.95Dryer Wall Vent, Black. The low profile DryerWallVent is a superior, safer choice for venting dryer exhaust to the exterior. The DryerWallVent’s large opening and angled damper provide maximum airflow efficiciency for safe venting of the dryer. Integrated magnets keep the damper closed when the dryer is not in use, keeping pests and elements on the outside. The larger vent opening makes cleaning and maintenance very accessible. Made in the USA from heavy 26 gauge Galvalume Steel.
-
DWV003 – Dryer Wall Vent, Tan
$41.95Dryer Wall Vent, Tan. The low profile DryerWallVent is a superior, safer choice for venting dryer exhaust to the exterior. The DryerWallVent’s large opening and angled damper provide maximum airflow efficiciency for safe venting of the dryer. Integrated magnets keep the damper closed when the dryer is not in use, keeping pests and elements on the outside. The larger vent opening makes cleaning and maintenance very accessible. Made in the USA from heavy 26 gauge Galvalume Steel.
-
-
DWV001 – Dryer Wall Vent, White
$41.95Dryer Wall Vent, White. The low profile DryerWallVent is a superior, safer choice for venting dryer exhaust to the exterior. The DryerWallVent’s large opening and angled damper provide maximum airflow efficiciency for safe venting of the dryer. Integrated magnets keep the damper closed when the dryer is not in use, keeping pests and elements on the outside. The larger vent opening makes cleaning and maintenance very accessible. Made in the USA from heavy 26 gauge Galvalume Steel.
-
PAT007 – 8″ x 8″ Sheet metal duct patch, 25 pack.
$41.588″ x 8″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 6″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
-
ZBG005 – 18″ & 26″ Zone Bag Replacement Bladder
$41.0018″ & 26″ Zone Bag Replacement Bladder. Repair your Air Duct Cleaning Inflatable Zone Bag with this heavy-duty replacement bladder. Bladders are designed to work with 18″ & 26″ Zone Bags. Color of replacement bladder may differ from picture.
-
AGR652-12 – 12″ Corner Button-Lock Brush
$41.0012″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR642-16 – 16″ Stiff Button-Lock Brush
$41.0016″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
DSR213 – Hardcast Iron-Grip 601 Indoor/Outdoor Fiber Free Gray. 1 Gallon
$40.00Hardcast Iron-Grip 601 Indoor/Outdoor Fiber Free Gray. Iron-Grip 601 is a versatile, all purpose, fiber-free, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Distinguished by its ability to accommodate minor vibration and movement, Iron-Grip stays flexible to save call-back labor. Iron-Grip’s excellent coverage rates and easy brush-on application provide low installed cost. Iron-Grip 601 is UL 181 B-M Listed Passes ASTM C-731, ASTM D-2202. USDA, EPA and FDA Approved. LEED compliant SCAQMD Rule 1168. City of Los Angeles Approval RR #8069 10 Year Outdoor Warranty when combined with an AFT-701 combination system.
-
PPE011 – DISPOSABLE RESPIRATOR, N95/KN95 or Equivalent, 10-Pack
$39.00PARTICULATE RESPIRATOR, MEETS NIOSH N-95/KN-95 OR EQUIVALENT, 10 Masks / Package
-
DSR122 – BBJ Micro-Coil Clean, 1/2 Gallon Concentrate
$39.00BBJ Micro Coil Clean is a biodegradable coil cleaning solution that is mild for the user and harmless to expensive HVAC/R equipment and the environment. It will remove built-up dirt and grime from coils resulting in improved system efficiency, reduced power consumption, and increased system life. It effectively cleans and deodorizes evaporator coils, heating coils, condenser coils, window units, air filters, blowers, and other dirty HVAC/R components. Concentrate mixes down to 10 gallons of product. Download MSDS
-
DSR113 – Mini Split Replacement Bib Bag
$39.00The Mini-Split Bib Kit replacement bib is made from high grade 4 mil plastic that has been sonically welded to provide strong seams and high-performance time after time.
-
AGR652-08 – 8″ Corner Button-Lock Brush
$39.008″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
DSR124 – Coil-Shot Tablets
$38.00The revolutionary CoilShot cleaning system is designed to offer fast and easy cleaning of residential and light commercial single-pass HVAC coils without the strain and bulkiness of using liquid coil cleaners.
-
CCV002 – Hose Coupling Wrap with Hook & Loop.
$38.00Hose Coupling Wrap with Hook & Loop. The Hose Coupling Wrap with Hook & Loop provides a protective wrap around your vacuum hose connections. Are you looking for extra protection around your hose sleeves, use the the Hose Coupling Wrap with Hook & Loop on vacuum hoses from 6″ – 12″ diameter.
-
SLV010 – 10″ Diameter Hose Sleeve.
$37.0010″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 10″ hose.
-
PAT224-14 – Cammed-PSA Access Door,14″x14″
$37.00Cammed Access Door for Sheet Metal Duct Work. 14″ x 14″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT223-14 – Hinged-PSA Access Door,14″x14″
$37.00Hinged Access Door for Sheet Metal Duct Work. 14″ x 14″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT222-16 – Cammed-DT Access Door, 16″x16″
$37.00Cammed Access Door for Sheet Metal Duct Work. 16″ x 16″ Hinged Door is Secured with 4 Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.
-
PAT221-16 – Hinged-DT Access Door, 16″x16″
$37.00Hinged Access Door for Sheet Metal Duct Work. 16″ x 16″ Hinged Door is Secured with Two Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.
-
CAS170 – Hurricane Triple Whip.
$37.00Hurricane Triple Whip. The Hurricane Triple Whip has three tentacles and can be used for either a ‘PUSH’ or ‘PULL’ cleaning method. The Hurricane Triple Whip has a better coverage rate than a single whip, but less aggressive whipping action. This tool is ideal for cleaning trunk lines or main ducts. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
HCT018 – Lenox/Hilmor 1 inch V-Notcher
$36.00Lenox/Hilmor 1 inch V-Notcher. Professional quality hand tools are a must on the job site. Never be without a set of notchers when duct/pipe fitting is part of your job. Use the 1 inch notcher to make small sheet metal notches for simple fabrications.
-
AGR642-12 – 12″ Stiff Button-Lock Brush
$36.0012″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR632-12 – 12″ Soft Button-Lock Brush
$36.0012″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
CAS120 – Hurricane Power Blow Nozzle.
$34.00Hurricane Power Blow Nozzle. The Hurricane Power Blow Nozzle has a venturi tip that allows extreme velocity and volumetric flow. Use the Hurricane Power Blow Nozzle for air washing register covers and other hard surfaces. The Hurricane Power Blow Nozzle has a trigger for variable flow and a hook for a quick hang on your tool belt. Trigger has standard 1/4″ air hose connection.
