-
HCT015 – Lenox/Hilmor Aviation Tin Snips, STRAIGHT
$24.00Lenox/Hilmor Aviation Tin Snips, STRAIGHT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT014 – Lenox/Hilmor Aviation Tin Snips, RIGHT
$24.00Lenox/Hilmor Aviation Tin Snips, RIGHT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT013 – Lenox/Hilmor Aviation Tin Snips, LEFT
$24.00Lenox/Hilmor Aviation Tin Snips, LEFT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT002 – Replacement cutting bit for Adjustable Hole Cutter.
$15.00Replacement cutting bit for Adjustable Hole Cutter. Use this Bit to make the perfect cut.
-
HCT001 – 2″ – 12″ Hole Cutter.
$76.002″ – 12″ Hole Cutter. Cut a perfect circle in up to #20 gauge sheet metal with this tool. Connect your duct cleaning vacuum hose to a round hole with a Snap Adaptor for ideal airflow.
-
GJR600 – The Major Insulation Removal Vacuum
$4,980.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/06/Major.pdf"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/IOM-Major.pdf" title="IOM Major"]
The Major Insulation Removal Vacuum is the largest, most powerful insulation removal vacuum available. The Major is built for contractors that encounter large removal, remediation, and renovation jobs where getting in and out in a timely manner makes the difference. The Major is built on a sturdy 4-wheel cart, is compatible with the optional HUM-V Drive system, and is powered by the popular Kohler Commando PRO series 20 HP Engine. The Major is designed to pull through hose runs up to 300′ long, and has a maximum airflow rating of 4,800 CFM.
-
GJR300 – 7 HP Commando Power Vacuum.
$2,195.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/06/Commando_Briggs.pdf"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/IOM_COMMANDO.pdf"]
7 HP Commando Power Vacuum. The Commando is Big Power with a Little Price. OHV Engine, 1,500 CFM, 2-Wheel Hand Truck. The Commando is the versatile vacuum that is useful for your insulation removal and dryer vent cleaning needs. The Commando Insulation Removal Vacuum is ideal for contractors tackling fewer than 2 jobs/month, or frequent jobs smaller than 800 sq. ft. The Commando processes all loose-fill insulation materials, WET & DRY, through up to 150′ of 6″ vacuum hose. Use up to 25′ of 8″ discharge hose off the vacuum to blow waste material into a dumpster or container for easy disposal.
-
GJR010 – 4″ Insulation Pick-Up Tube.
$225.004″ Insulation Pick-Up Tube. The Insulation Pick-Up Wand can be used as an extension on your 4″ Vaculite or Flexi-Flow vacuum hose when removing insulation. The Insulation Pick-Up Wand can keep you from bending over, and will help reach into tight spaces like shallow eves and soffits.
-
GJR009 – 6″ Insulation Pick-Up Wand.
$250.006″ Insulation Pick-Up Wand. The Insulation Pick-Up Wand can be used as an extension on your 6″ Vaculite or Flexi-Flow vacuum hose when removing insulation. The Insulation Pick-Up Wand can keep you from bending over, and will help reach into tight spaces like shallow eves and soffits.
-
GEN933 – 400cc Carbon Cannister for CARB Compliancy on 6 Gallon Fuel Cell.
$78.00400cc Carbon Cannister for CARB Compliancy on 6 Gallon Fuel Cell. Add this 400cc carbon cannister to your General, Major, or Ranger vacuum and 6 gallon fuel cell for CARB comliancy.
-
GEN930 – OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums
$348.00OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums. The bolt-on fuel cell kit comes with drill templates for retro-fit on older vacuums, new vacuums are pre-drilled and ready for installation. The kit includes a 6-gallon Flambeau tank, a heavy duty frame, the required hoses, and all the necessary hardware. Installation of this kit removes the necessity of detatchable fuel cells and any quick-disconnect fittings. Add this item to your new vacuum purchase. Carbon cannister (GEN933) not included. For CARB compliancy add P/N: GEN933 to your order.
-
GEN401 – 31 HP Ranger Power Vacuum.
$8,900.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/06/Ranger.pdf"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/IOM_Ranger.pdf"]
31 HP Ranger Power Vacuum. The Ranger is More Power for Duct Cleaning. Briggs & Stratton Engine, 7,000 CFM, Portable 4-Wheel Cart. The Ranger comes complete with a 6-gallon OSHA/EPA fuel tank attached to the machine.  Items included in vacuum package: 10′ tall filter bag (GBC002), dust collection bucket & clamp (GEN007), stainless steel guide rods (GEN026). Vacuum hose is not included in vacuum package. The Ranger is compatible with the HUM-V Assist Drive System, ordered as an additional item with your Ranger.
The Ranger is the vacuum/collector that will give you a competitive edge in the air duct cleaning business. The Ranger has the versatility to tackle residential, light & heavy commercial, and indsutrial application cleaning projects. The Ranger is a high powered Gas Portable Air Duct Cleaning Vacuum that features a portable four-wheeled cart for placement at the job-site in the most opportunistic spot. On many residential air duct cleaning projects, the Ranger can be connected to the air duct system with 50′-75′ of vacuum hose, allowing for maximum airflow by the vacuum. Excessive hose runs, and long setup times are a thing of the past when your cleaning crew operates The Ranger. With average hose runs between 50′-75′, setup times for a two-man crew can be limited to 10 minutes; storing truck-loads of bulky hose for residential cleaning projects can be a problem of the past.
With the Ranger, you’ll have more airflow available than most truck mount vacuums can deliver to the duct. The material handling fan-wheel on The Ranger, allows for constant airflow of 7,000 CFM through the entire cleaning process. Dirty filters in the airstream are a non-issue with The Ranger. An oversize cloth filter bag acts as the filter device, and a large cannister collects removed debris for disposal. As air duct cleaning projects increase in size, airflow should in turn also increase. The coupling of two Ranger power vacuums together is an effective, low cost method for increasing airflow on projects that demand it. In light commercial and industrial applications, The Ranger is capable of pulling through hose-runs up to 300′ in length. The Ranger is also available with Alternate Fuel/Power Options including LP-GAS and Electric Motor. For industrial applications that allow the combustion of LP-GAS engines indoors, bring The Ranger indoors to reduce hose runs and increase airflow. Filtration cabinets are available for LP-GAS and Electric Powered vacuum arrangements that can provide CLASS 100, HEPA filtered air.
The Ranger Air Duct Cleaning system can be comfortably set-up in a box truck or enclosed trailer, sized 6′ x 12′ or larger. Complete cleaning packages are available for all applications including residential, light commercial, industrial, and other special arrangements. Plan your custom package with the sales team, or choose from the popular arrangments that include The Ranger, a powerful air compressor, vacuum hose, compressed air cleaning whips, duct brushes, tools, and materials necessary to access and make proper closure to many types of ductwork.
-
GEN200 – 20 HP General Power Vacuum.
$5,200.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/06/General.pdf" title="General.PDF Download"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/IOM_GENERAL.pdf"]
20 HP General Power Vacuum. The General is All the Vacuum You’ll Need for Duct Cleaning. Kohler Command Engine, 5,250 CFM, Portable 4-Wheel Cart.
If your Air Duct Cleaning Crew needs a vacuum collector with Serious Suction… Look No Further. The General delivers ‘Duct-Truck’ like performance at a fraction of the price and without being tied to the curb.
The General is the vacuum/collector you need for a powerful start in the air duct cleaning business. The General has the versatility to tackle residential, light commercial, and indsutrial application cleaning projects.
The General is a high powered Gas Portable Air Duct Cleaning Vacuum that features a portable four-wheeled cart for placement at the job-site in the most opportunistic spot. On many residential air duct cleaning projects, the General can be connected to the air duct system with 50′-75′ of vacuum hose, allowing for maximum airflow by the vacuum.
Excessive hose runs, and long setup times are a thing of the past when your cleaning crew operates The General. With average hose runs between 50′-75′, setup times for a two-man crew can be limited to 10 minutes; storing truck-loads of bulky hose for residential cleaning projects can be a problem of the past.
The material handling fan-wheel on The General, allows for constant airflow of 5,250 CFM through the entire cleaning process. Dirty filters in the airstream are a non-issue with The General. An oversize cloth filter bag acts as the filter device, and a large cannister collects removed debris for disposal.
As air duct cleaning projects increase in size, airflow should in turn also increase. The coupling of two General power vacuums together is an effective, low cost method for increasing airflow on projects that demand it. In light commercial and industrial applications, The General is capable of pulling through hose-runs up to 250′ in length. The General is also available with Alternate Fuel/Power Options including LP-GAS and Electric Motor. For industrial applications that allow the combustion of LP-GAS engines indoors, bring The General indoors to reduce hose runs and increase airflow. Filtration cabinets are available for LP-GAS and Electric Powered vacuum arrangements that can provide CLASS 100, HEPA filtered air.
The General Air Duct Cleaning system can be comfortably set-up in a box truck or enclosed trailer, sized 6′ x 12′ or larger. Complete cleaning packages are available for all applications including residential, light commercial, industrial, and other special arrangements. Plan your custom package with the sales team, or choose from the popular arrangments that include The General, a powerful air compressor, vacuum hose, compressed air cleaning whips, duct brushes, tools, and materials necessary to access and make proper closure to many types of ductwork.
-
GEN007 – Dust Collection Bucket and Clamp
$98.00Dust Bucket and Clamp. The General and Ranger Duct Cleaning Vacuums use this Dust Bucket and Clamp under the filter bag to collect dirt and debris. This heavy duty bucket and clamp allow for easy clean up after duct cleaning jobs. Use a trash liner to collect debris for easy removal. Bucket and Clamp are only sold together.
-
GEL700 – HEPA Filtered Electrak 7 Power Vacuum.
$10,950.00HEPA Filtered Electrak 7 Power Vacuum. The Electrak 7 will help you tackle the most demanding of all your commercial duct cleaning jobs. 4,400 working CFM, 9″ static, Portable Design, and Hospital Grade HEPA Filtration.
-
GBD020 – Insul-Dumpster Cover
$130.00The Insul-Dumpster Cover is leading the way in the Insulation Removal Industry. Insul-Bags can be costly and cumbersome on large scale jobs. Restoration projects requiring dumpster service make the Insul-Dumpster Cover a natural fit. Insul-Dumpster Covers are designed to fit standard roll-off dumpsters, 20-40 yard size. Discharge Hose Nozzle input allows a clean setup. Use the built-in shock cord to skirt around the dumpster body for a tight fit. Insul-Dumpster Cover is an economically savvy product when more than 12 bags will be used on a single job and a dumpster is present. The Insul-Dumpster Cover is made of a disposable filter media that can be discarded with removed material. Designed to fit Dumpster Body Size: 23.5′ Long x 8′ Wide.
-
GBD007 – Electrak 7 First Stage Filter
$78.0012- PACK – Electrak 7 First Stage Filter. The Electrak 7 First Stage Filter is a disposable fabric sack that catches the large debris in the air stream that will flow through your Electrak 7 HEPA Vacuum. The large debris can be removed from the sack, and the filter media should be changed on every job.
-
GBD005 – Electrak 7 First Stage Filter
$9.00Electrak 7 First Stage Filter. The Electrak 7 First Stage Filter is a disposable fabric sack that catches the large debris in the air stream that will flow through your Electrak 7 HEPA Vacuum. The large debris can be removed from the sack, and the filter media should be changed on every job.
-
GBD003 – Case of 10 Disposable Filter Bags.
$100.00Case of 10 Disposable Filter Bags. 4′ diameter x 6′ length. Disposable bag is made of throw-away breathable material. Bag volume is 75 cubic feet. Excellent filtration for removal of cellulose, fiberglass, rock-wool, vermiculite and other insulation materials.
-
GBD002 – Disposable Insulation Containment Bag.
$15.00Disposable Insulation Containment Bag. 4′ diameter x 6′ length. Disposable bag is made of throw-away breathable material. Bag volume is 75 cubic feet. Excellent filtration for removal of cellulose, fiberglass, rock-wool, vermiculite and other insulation materials.
-
GBC006 – Duct Truck Dust Filter Bag, 6-Pack
$217.00Duct Truck Dust Filter Bag. Replacement filters measure 20″ in diameter and 60″ in length. Filters will fit on collars up to 20″. Filters are sold in 6-Packs.
-
GBC002 – Ranger Filter Bag.
$251.00Ranger Filter Bag. 4′ diameter x 10′ tall washable cloth filter bag. Sits atop dust collection bucket (not included), and stabilizes with guide rods (not included). AKA: Oversize General Bag
-
GBC001 – General Filter Bag.
$208.00General Filter Bag. 4′ diameter x 7′ tall washable cloth bag. Sits atop dust collection bucket (not included), and is stabilized by guide rods (not included).
-
PPE002 – Water Proof Booties
$21.00Water Proof!!! Booties for Boots up to Size 13. These Booties provide the shoe covering you’ll need to feel comfortable walking through your customer’s home. On wet or rainy days, protect your customer’s home with Water Proof Booties!!! Booties come in a box of 50 pairs.
-
PPE015 – The Hoodie.
$3.00The Hoodie. The Hoodie is the only disposable head protection garment available. The Hoodie is ideal for use while performing dirty jobs like duct cleaning, insulation removal, mold remediation and many more. The Hoodie is form fitting and fits loose over the nose and mouth for extreme comfort.
-
FTH024 – HEPA Filter Cartidge for Electrak Air Duct Vacuum Collector.
$418.00HEPA Filter Cartidge for Electrak Air Duct Vacuum Collector. The replacment HEPA Filter for the Electrak is rated to clean the air to hospital grade (CLASS 100 Air) 99.97% efficient @ 0.3 microns. This filter panel cartridge can be used in either Eletrak 1 or 7 models and any other equipment that specs a 24″ x 24″ x 12″ HEPA Filter rated for 2,000 CFM or less. This filter has one gasketed side and is bidirectional, so it can accept airflow in both directions.
-
FTB020 – Electrak 1 Second Stage Filter
$80.00Electrak 1 Second Stage Filter. The Electrak 1 Second Stage Pocket Filter is designed to catch the finer material that passes through the first stage filter, but is not destined for the HEPA. The Electrak 1 Second Stage Filter is ASHRAE 95% Efficient. Only the finest of particles are filtered by your HEPA pass through the Electrak 1 Second Stage Filter.
-
FTB003 – Electrak 1 First Stage Filter
$30.00Electrak 1 First Stage Filter. The Electrak 1 First Stage Filter, or Cube Filter, is designed to catch large debris in air stream that flows through your Electrak 1 HEPA Vacuum. Large items can be removed from this filter, and the filter should be changed every 2-3 jobs or as necessary. Good First Stage Filter maintenance protects second stage filters.
-
FOG017 – Coil-Shot Wand Assembly
$54.003 ft. wand is specially designed to quickly connect to CoilShot cleaning tool and clean coils from inside to outside. The wand features a slim profile that fits between the grate so you don’t have to remove the top fan and housing.
-
FOG016 – Coil-Shot Sprayer Gun
$103.00The CoilShot® condenser cleaner tool and tablet system make cleaning condenser coils faster and easier than ever before. The unit connects directly to a garden hose and uses a single pre-measured tablet to apply foaming coil cleaner directly to coils. For added cleaning performance, use it with the optional 3ft wand. The innovative technology quickly cleans coils of dirt, grime, and even grease*! Eliminate the need for lugging around and measuring heavy, bulky liquid coil cleaners.
