-
SLV008 – 8″ Diameter Hose Sleeve.
$33.008″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 8″ hose.
-
PAT223-12 – Hinged-PSA Access Door,12″x12″
$32.00Hinged Access Door for Sheet Metal Duct Work. 12″ x 12″ Hinged Door is Secured with One Cam-Lock. Pressure Sensitive Adhesive flange for easy installation.
-
PAT222-14 – Cammed-DT Access Door, 14″x14″
$32.00Cammed Access Door for Sheet Metal Duct Work. 14″ x 14″ Hinged Door is Secured with 4 Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.
-
PAT221-14 – Hinged-DT Access Door, 14″x14″
$32.00Hinged Access Door for Sheet Metal Duct Work. 14″ x 14″ Hinged Door is Secured with Two Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.
-
DPL003 – 1″ diameter duct plugs.
$32.001″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 500 per package.
-
CAS119-R – 5′ Rigid Hurricane Rod
$32.005′ Rigid Hurricane Rod. Rigid Hurricane Rods are the ideal tool for compressed air cleaning of duct work in large commercial settings. Use the 5′ Rigid Hurricane Rods to connect extensions to reach down straight duct work in excess of 30′ and well over 100′ in length.
-
HCT022 – Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver
$31.00Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver. Professional quality hand tools are a must on the job site. This 9-in-1 driver tool puts the most common driver bits in the HVAC industry at your fingertips.
-
CAS155 – 12 Hole – Hurricane Reverse Flow Duct Ball
$31.0012 Hole – Hurricane Reverse Flow Duct Ball. The Hurricane Reverse Flow Duct Ball provides a gentle cleaning technique can that be used on many types of duct work and in many situations. A Reverse Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a 12- hole Hurricane Reverse Flow Duct Ball for increase air flow and performace compared to a 6-Hole duct ball. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS154 – 12 Hole – Hurricane Forward Flow Duct Ball
$31.0012 Hole – Hurricane Forward Flow Duct Ball. The Hurricane Forward Flow Duct Ball provides a gentle cleaning technique can that be used on many types of duct work and in many situations. A Forward Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a 12- hole Hurricane Forward Flow Duct Ball for increase air flow and performace compared to a 6-Hole duct ball. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS136 – Hurricane Reverse Whip with Jets.
$31.00Hurricane Reverse Whip with Jets. The Hurricane Reverse Whip combines the forward force of jets and a 12″ medium pressure whip tentacle. This tools is ideal for aggressive cleaning in round steel ductwork. Whip tentacles can be replaced and cut to custom length. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
CAS135 – Hurricane Forward Whip with Jets.
$31.00Hurricane Forward Whip with Jets. The Hurricane Forward Whip combines the forward force of jets and a 12″ medium pressure whip tentacle. This tools is ideal for aggressive cleaning in round steel ductwork. Whip tentacles can be replaced and cut to custom length. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
FTB003 – Electrak 1 First Stage Filter
$30.00Electrak 1 First Stage Filter. The Electrak 1 First Stage Filter, or Cube Filter, is designed to catch large debris in air stream that flows through your Electrak 1 HEPA Vacuum. Large items can be removed from this filter, and the filter should be changed every 2-3 jobs or as necessary. Good First Stage Filter maintenance protects second stage filters.
-
CAS130 – Hurricane Trigger Valve
$30.00Hurricane Trigger Valve, or Dryer Vent Line Trigger. The Hurricane Trigger Valve is a hand held trigger to operate air-flow through the Hurricane Dryer Vent Line or Rigid Hurricane Extension Rods. Trigger has standard 1/4″ air hose connection, and Rectus quick connect coupler.
-
AGR661-06 – 6″ Abrasive Button-Lock Brush
$30.006″ Abrasive Button-Lock Brush. Use this agressive and abrasive fibered brush with the AGR6XX series brush system to clean round steel, and other rigid types of duct work. The bristles used in this brush out perform flexible steel bristles, and provide an abrasive grit that is embedded in the fiber to scrub into the duct surface. The agressive bristles in this brush are ideal for chewing up hard dryer lint and other duct debris. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
PPE012 – DISPOSABLE RESPIRATOR, N100, 1-Pack
$29.00PARTICULATE RESPIRATOR, MEETS NIOSH N-100 OR EQUIVALENT, 1 Mask / Package
-
PAT224-12 – Cammed-PSA Access Door,12″x12″
$29.00Cammed Access Door for Sheet Metal Duct Work. 12″ x 12″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT224-10 – Cammed-PSA Access Door,10″x10″
$29.00Cammed Access Door for Sheet Metal Duct Work. 10″ x 10″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT223-10 – Hinged-PSA Access Door,10″x10″
$29.00Hinged Access Door for Sheet Metal Duct Work. 10″ x 10″ Hinged Door is Secured with One Cam-Lock. Pressure Sensitive Adhesive flange for easy installation.
-
AGR661-04 – 4″ Abrasive Button-Lock Brush
$29.004″ Abrasive Button-Lock Brush. Use this agressive and abrasive fibered brush with the AGR6XX series brush system to clean round steel, and other rigid types of duct work. The bristles used in this brush out perform flexible steel bristles, and provide an abrasive grit that is embedded in the fiber to scrub into the duct surface. The agressive bristles in this brush are ideal for chewing up hard dryer lint and other duct debris. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR641-08 – 8″ Stiff Button-Lock Brush
$29.008″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR631-08 – 8″ Soft Button-Lock Brush
$29.008″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
TAP005 – Vent / Grill Mask Tape.
$28.00Vent / Grill Mask Tape. 8″ x 200′ with 4″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.
-
PAT222-12 – Cammed-DT Access Door, 12″x12″
$28.00Cammed Access Door for Sheet Metal Duct Work. 12″ x 12″ Hinged Door is Secured with 2 Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.
-
PAT221-12 – Hinged-DT Access Door, 12″x12″
$28.00Hinged Access Door for Sheet Metal Duct Work. 12″ x 12″ Hinged Door is Secured with One Cam-Lock. Door contains 5/8″ knock-over tabs for easy installation.
-
DSR214 – Hardcast Versa-Grip 181 Indoor/Outdoor Fiber Reinforced White. 1 Gallon.
$28.00Hardcast Versa-Grip 181 Indoor/Outdoor Fiber Free White. 1 Gallon. Versa-Grip 181 is a premium grade, versatile all purpose, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Versa-Grip incorporates a built-in fiber reinforcement for exceptional strength, with UV inhibitors for outdoor use. 10 Year Outdoor Warranty when combined with an AFT-701 combination system.
-
AGR631-04 – 4″ Soft Button-Lock Brush
$28.004″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
HDF408 – DryerFlex 4-Ply Flexible Dryer Vent Transition Hose
$27.854-Ply DryerFlex Flexible Dryer Vent Transition Hose. DryerFlex, a safe and effective airflow-efficient dryer transitin duct, combines the ease of use and flexibility of wire bound foil flex hose with semi-rigid aluminum flex. It simplifies dryer connections and protects against dangerous kinks and bends. Other ducts bend and kink, restricting the airflow and allowing lint to accumulate in the dryer exhaust system to become a fire hazard. With DryerFlex, installations are easier and laundry areas are safer. A UL Listing of UL2158A is required by building code and appliance manufacturers. DryerFlex is UL2158A Listed. Kit includes 2 stainless steel DryerClamps. This product length is 96″ (8′).
-
DSR215 – Hardcast Flex-Grip 550 Indoor/Outdoor Fiber Free White. 1 Gallon
$27.00Hardcast Flex-Grip 550 Indoor/Outdoor Fiber Free White. 1 Gallon. Flex-Grip 550 is an all purpose, fiber-free, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Distinguished by its ability to accommodate minor vibration and movement, Flex-Grip 550 stays flexible to save call-back labor. Flex-Grip 550’s excellent coverage rates and easy brush-on application provide low installed cost. • UL 181 B-M Listed • Passes ASTM C-731, ASTM D-2202 • USDA, EPA and FDA Approved • LEED compliant • SCAQMD Rule 1168 • City of Los Angeles Approval RR #8069
-
CAS119-M – 5′ Medium Hurricane Rod
$26.005′ Medium Hurricane Rod. Flexible Hurricane Rods are the ideal tool for compressed air cleaning of duct work in residential & light commercial settings. Use the 5′ Medium Hurricane Rods to connect extensions to reach down branch duct work up to 30′ in length.
-
CAS119-F – 5′ Flexible Hurricane Rod
$26.005′ Flexible Hurricane Rod. Flexible Hurricane Rods are the ideal tool for compressed air cleaning of duct work in residential & light commercial settings. Use the 5′ Flexible Hurricane Rods to connect extensions to reach down branch duct work up to 30′ in length.
